#Create Workset Version: 1.0.1.8
#User: dgeckle
#======================================================================
# Ohio DOT OpenRoads Designer Connect Workset Configuration File
#======================================================================
%if defined(OHDOT_WORKSETCFGINCLUDED)
	#dont include anything because the cfg file was already included, this is to stop a double load of this file when in PW 
	#since our WorkSets location is the same as the WorkSet location.
%else
	OHDOT_WORKSETCFGINCLUDED = 1
	OHDOT_WORKSET_LOC = $(_USTN_WORKSETSROOT)$(_USTN_WORKSETNAME)/
	OHDOT_PID = $(_USTN_WORKSETNAME)
	#============================================================================
	# Workset Configuration (Replaces variables formerly in the PCF File)
	#============================================================================
	%if defined (_PWEXPLORER)
		_USTN_WORKSETROOT = $(_USTN_WORKSETSROOT)

		# Set the following directory names based on the Ohio DOT Project 1.0 Template
		_USTN_WORKSETSTANDARDSDIRNAME    = 990-WorkSetStandards
		_USTN_WORKSETDGNSDIRNAME         = 400-Engineering

		# Set the following directory paths based on the Ohio DOT Project 1.0 Template

		_USTN_WORKSETDGNS          = $(_USTN_WORKSETROOT)
		_USTN_WORKSETSTANDARDS     = $(_USTN_WORKSETROOT)$(_USTN_WORKSETSTANDARDSDIRNAME)/

		_USTN_WORKSETDGNWS         = $(_USTN_WORKSETSTANDARDS)$(_USTN_WORKSETNAME).dgnws
		%lock _USTN_WORKSETDGNWS
	%else
		_USTN_WORKSETROOT			= $(OHDOT_WORKSET_LOC)
		
		# Search path for design files
		_USTN_WORKSETDGNS          		= $(_USTN_WORKSETROOT)
		_USTN_WORKSETSTANDARDS     		= $(_USTN_WORKSETROOT)990-WorkSetStandards/

		_USTN_WORKSETDGNWS         = $(_USTN_WORKSETSTANDARDS)$(_USTN_WORKSETNAME).dgnws 
		%lock _USTN_WORKSETDGNWS

		MS_BACKUP 				= $(_DGNDIR)		#Backup to same location as dgn
		#%lock MS_BACKUP 
	%endif
	# Search path for design files
	MS_DEF 					= $(_USTN_WORKSETROOT) #Project Location Start
	#%lock MS_DEF
	#====================================================================================
	# Seed Files
	#====================================================================================
	MS_SEEDFILES 				= $(_USTN_WORKSETSTANDARDS)/Seed/   # Search Directory for Project Specific Seed files.
	#%lock MS_SEEDFILES 
	MS_DESIGNSEED				= $(OHDOT_PID)_DesignSeed2d.dgn   # Default Seed File.

	MS_DESIGNMODELSEED			= $(OHDOT_PID)_DesignSeed2d.dgn
	MS_DESIGNMODELSEEDNAME			= Design
	OHDOT_DESIGN3DMODELSEED			= $(OHDOT_PID)_DesignSeed3d.dgn
	OHDOT_DESIGN3DMODELSEEDNAME		= Design
	MS_DRAWINGMODELSEED			= OHDOT_DrawingSeed2d.dgn
	MS_DRAWINGMODELSEEDNAME			= Drawing
	MS_SHEETMODELSEED			= OHDOT_SheetSeed2d.dgn
	MS_SHEETMODELSEEDNAME			= Sheet
	#------------------------------------------------------------------------------------

	MS_GEOCOORDINATE_USERLIBRARIES 		= $(_USTN_WORKSETSTANDARDS)GCS/$(OHDOT_PID)_Custom.dty
	#%lock MS_GEOCOORDINATE_USERLIBRARIES 
	CIVIL_ROADWAY_TEMPLATE_LIBRARY 		= $(_USTN_WORKSETSTANDARDS)Template Library/$(OHDOT_PID)_Templates.itl
	#%lock CIVIL_ROADWAY_TEMPLATE_LIBRARY 
	MS_PRINTDEF_PATH 			= $(_USTN_WORKSETROOT)990-WorkSetStandards/Plotdrv/	# Search path for .pset and .ini files
	#%lock MS_PRINTDEF_PATH 
	MS_DESIGNSCRIPT_PATH			= $(_USTN_WORKSETROOT)990-WorkSetStandards/Plotdrv/	# Search path for .pset and .ini files
	#%lock MS_DESIGNSCRIPT_PATH 
	MS_PLTFILES 				= $(_USTN_WORKSETROOT)950-Reviews/                      # Output Directory for Print Files.
	#%lock MS_PLTFILES 
	CIVIL_SURVEY_PHOTOS_FOLDER		= $(_USTN_WORKSETROOT)300-Survey/SurveyData/Images/Field/
	#====================================================================================
	# Reference File Paths and Settings
	#====================================================================================
	MS_REF_DEFAULTATTACHDIRECTORY 		= $(_USTN_WORKSETDGNS)  # Set the default directory when attaching references instead of the last directory
	#%lock MS_REF_DEFAULTATTACHDIRECTORY 
	#------------------------------------------------------------------------------------ 
%endif
