1)  These Excel sheets were created for use with a AutoTable sheet cell in
      MicroStation at a scale of one (1).
      
2)  Please read the documentation fully before changing any Excel worksheets.

3)  The names of these Excel files were kept identical to the cell names in the
      ODOT_Sheets.cel cell library in MicroStation, except for the following:
      
           LAND.xls - Works with the Sheet cells LAND1_AutoTable & LAND2_AutoTable
           PLPRS.xls - Works with the Sheet cells PLPRS1_AutoTable & PLPRS3_AutoTable

4)  For the most part the actual formatting of the cells in the Excel file will not require reformatting
      but different text alignment may be necessary especially in the column headers
      (i.e.  center-center alignment, word wrap toggled on).

5)  The following is from the documentation, Plan Sheet Design section:

      Place a AutoTable sheet cell in a design file and use the upper-left interiror border of
      the sheet cell for your original/placement point.

      All Excel standard sheets are designed for the resulting MicroStation sheet cell to be
      placed at a Scale of one (1) in a design file.

      The sheet cell may then be scaled to the desired scale without any resulting problems.

      Any updating of the worksheet will honor the new scale in MicroStation."