#======================================================================
# Ohio DOT OpenRoads Designer Connect Workset Configuration File
#======================================================================

OHDOT_WORKSET_LOC = C:/CONNECT_Config/WorkSpaces/OHDOT/WorkSets/96213/
OHDOT_PID = 96213
#============================================================================
# Workset Configuration (Replaces variables formerly in the PCF File)
#============================================================================
%if defined (_PWEXPLORER)
	_USTN_WORKSETROOT = $(_USTN_WORKSETSROOT)

	# Set the following directory names based on the Ohio DOT Project 1.0 Template
	_USTN_WORKSETSTANDARDSDIRNAME    = 990-WorkSetStandards
	_USTN_WORKSETDGNSDIRNAME         = 400-Engineering

	# Set the following directory paths based on the Ohio DOT Project 1.0 Template

	_USTN_WORKSETDGNS          = $(_USTN_WORKSETROOT)$(_USTN_WORKSETDGNSDIRNAME)/
	_USTN_WORKSETSTANDARDS     = $(_USTN_WORKSETROOT)$(_USTN_WORKSETSTANDARDSDIRNAME)/

	_USTN_WORKSETDGNWS         = $(_USTN_WORKSETSTANDARDS)$(_USTN_WORKSETNAME).dgnws
	%lock _USTN_WORKSETDGNWS
%else
	_USTN_WORKSETROOT			= $(OHDOT_WORKSET_LOC)
	
	# Search path for design files
	_USTN_WORKSETDGNS          		= $(_USTN_WORKSETROOT)
	_USTN_WORKSETSTANDARDS     		= $(_USTN_WORKSETROOT)990-WorkSetStandards/

	_USTN_WORKSETDGNWS         = $(_USTN_WORKSETSTANDARDS)$(_USTN_WORKSETNAME).dgnws 
	%lock _USTN_WORKSETDGNWS

	MS_BACKUP 				= $(_DGNDIR)		#Backup to same location as dgn
	#%lock MS_BACKUP 
%endif
# Search path for design files
MS_DEF 					= $(_USTN_WORKSETROOT)400-Engineering/ #Project Location Start
#%lock MS_DEF
#====================================================================================
# Seed Files
#====================================================================================
MS_SEEDFILES 				= $(_USTN_WORKSETSTANDARDS)/Seed/   # Search Directory for Project Specific Seed files.
#%lock MS_SEEDFILES 
MS_DESIGNSEED				= $(OHDOT_PID)_DesignSeed2d.dgn   # Default Seed File.

MS_DESIGNMODELSEED			= $(OHDOT_PID)_DesignSeed2d.dgn
MS_DESIGNMODELSEEDNAME			= Design
OHDOT_DESIGN3DMODELSEED			= $(OHDOT_PID)_DesignSeed3d.dgn
OHDOT_DESIGN3DMODELSEEDNAME		= Design
MS_DRAWINGMODELSEED			= OHDOT_DrawingSeed2d.dgn
MS_DRAWINGMODELSEEDNAME			= Drawing
MS_SHEETMODELSEED			= OHDOT_SheetSeed2d.dgn
MS_SHEETMODELSEEDNAME			= Sheet
#------------------------------------------------------------------------------------

MS_GEOCOORDINATE_USERLIBRARIES 		= $(_USTN_WORKSETSTANDARDS)GCS/$(OHDOT_PID)_Custom.dty
#%lock MS_GEOCOORDINATE_USERLIBRARIES 
CIVIL_ROADWAY_TEMPLATE_LIBRARY 		= $(_USTN_WORKSETSTANDARDS)Template Library/$(OHDOT_PID)_Templates.itl
#%lock CIVIL_ROADWAY_TEMPLATE_LIBRARY 
MS_PRINTDEF_PATH 			= $(_USTN_WORKSETROOT)990-WorkSetStandards/Plotdrv/	# Search path for .pset and .ini files
#%lock MS_PRINTDEF_PATH 
MS_PLTFILES 				= $(_USTN_WORKSETROOT)000-Admin/PlanReviews/   # Output Directory for Print Files.
#%lock MS_PLTFILES 
CIVIL_SURVEY_PHOTOS_FOLDER		= $(_USTN_WORKSETROOT)300-Survey/SurveyData/Images/Field/
#====================================================================================
# Reference File Paths and Settings
#====================================================================================
MS_REF_DEFAULTATTACHDIRECTORY 		= $(_USTN_WORKSETDGNS)  # Set the default directory when attaching references instead of the last directory
#%lock MS_REF_DEFAULTATTACHDIRECTORY 
#------------------------------------------------------------------------------------