#------------------------------------------------------------------------------- # This is a MicroStation V8 Sheet Size Definition file. # # Lines that begin with # are for descriptive comments. # # $Copyright: (c) 2015 Bentley Systems, Incorporated. All rights reserved. $ #------------------------------------------------------------------------------- # The active sheetsizes.def file is used to control the available list of Sheet Sizes # which are used to define the printable area for sheet models. # # The format of this file consists of one sheet size definition per line, where the # format of each line is: # # Name; Units; Height; Width; TopMargin; LeftMargin; BottomMargin; RightMargin; UnitSystems # # Name: # Used for display of the sheet size in the user interface. Use the special value "_[SYSTEM]_" # to indicate that the program should use the standard builtin name. # # Units: # Controls the interpretation of the subsequent numeric values such as Height and Width. True # scale will be applied to all values. # # Valid values for Units are: # 1 Inches # 2 Millimeters # # Heigth and Width: # Control the corresponding dimensions of the sheet. # # TopMargin, LeftMargin, BottomMargin, and RightMargin: # Control the corresponding margins that decrease the printable area within the sheet size defined # by the Height and Width. Negative values can be used for any of the margins to move the margins # outside of the displayed paper. # # UnitSystems: # Used to filter the list of sizes. The user interface will typically use the active model's # master units to control the visible sizes. Only sizes that specify a system that matches # the system of the active model will be displayed. Multiple systems can be specified. If # 1,2,3 is specified then the size will not be filtered based on the system. # # For each line any content following '#' is ignored. # # NOTE: The Roll paper sizes can be used with any roll paper device. The height and width will # emulate the size of the paper after it is cut. # # NOTE: The Cut Sheet sizes can be use be used with most sheet paper printers such that the margin # is less than the maximum printable area that the printing device can produce. # # To customize this data make a copy of this file, place it within your configuration, and # define the configuration variable MS_CUSTOMSHEETSIZEDEF with that location. # #------------------------------------------------------------------------------- # # MicroStation Standard Sheet Size Examples # # Name Units Height Width TopMargin LeftMargin BottomMargin RightMargin UnitSystems #Roll paper sizes. #_[SYSTEM]_ ; 1; 8.5; 11; 0.00; 0.00; 0.00; 0.00; 1,3 #ANSIA #_[SYSTEM]_ ; 1; 11; 17; 0.00; 0.00; 0.00; 0.00; 1,3 #ANSIB #_[SYSTEM]_ ; 1; 17; 22; 0.00; 0.00; 0.00; 0.00; 1,3 #ANSIC #_[SYSTEM]_ ; 1; 22; 34; 0.00; 0.00; 0.00; 0.00; 1,3 #ANSID #_[SYSTEM]_ ; 1; 34; 44; 0.00; 0.00; 0.00; 0.00; 1,3 #ANSIE # Architectural Sizes. #_[SYSTEM]_ ; 1; 9; 12; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHA #_[SYSTEM]_ ; 1; 12; 18; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHB #_[SYSTEM]_ ; 1; 18; 24; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHC #_[SYSTEM]_ ; 1; 24; 36; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHD #_[SYSTEM]_ ; 1; 36; 48; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHE #_[SYSTEM]_ ; 1; 30; 42; 0.00; 0.00; 0.00; 0.00; 1,3 #ARCHE1 #_[SYSTEM]_ ; 2; 841; 1189; 0.00; 0.00; 0.00; 0.00; 2 #ISOA0 #_[SYSTEM]_ ; 2; 594; 841; 0.00; 0.00; 0.00; 0.00; 2 #ISOA1 #_[SYSTEM]_ ; 2; 420; 594; 0.00; 0.00; 0.00; 0.00; 2 #ISOA2 #_[SYSTEM]_ ; 2; 297; 420; 0.00; 0.00; 0.00; 0.00; 2 #ISOA3 #_[SYSTEM]_ ; 2; 210; 297; 0.00; 0.00; 0.00; 0.00; 2 #ISOA4 #Cut Sheet sizes. #_[SYSTEM]_; 1; 8.00; 10.50; 0.25; 0.25; 0.25; 0.25; 1,3 #ANSIACutSheet #_[SYSTEM]_; 1; 10.50; 16.50; 0.25; 0.25; 0.25; 0.25; 1,3 #ANSIBCutSheet #_[SYSTEM]_; 1; 16.50; 21.50; 0.25; 0.25; 0.25; 0.25; 1,3 #ANSICCutSheet #_[SYSTEM]_; 1; 21.50; 33.50; 0.25; 0.25; 0.25; 0.25; 1,3 #ANSIDCutSheet #_[SYSTEM]_; 1; 33.50; 43.50; 0.25; 0.25; 0.25; 0.25; 1,3 #ANSIECutSheet #OHDOT Specified Sheets #OHDOT 8.5x11; 1; 132; 102; 0.00; 0.00; 0.00; 0.00; 1 #8.5 x 11 (times 12) #OHDOT 11x17; 1; 132; 204; 0.00; 0.00; 0.00; 0.00; 1 #11 x 17 (times 12) #OHDOT 22x34; 1; 264; 408; 0.00; 0.00; 0.00; 0.00; 1 #22 x 34 (times 12) OHDOT 8.5x11; 1; 132.000264; 102.000204; 0.00; 0.00; 0.00; 0.00; 3 #8.5 x 11 in U.S. Survey Feet (times 12.000002) OHDOT 11x17; 1; 132.000264; 204.000408; 0.00; 0.00; 0.00; 0.00; 3 #11 x 17 in U.S. Survey Feet (times 12.000002) OHDOT 22x34; 1; 264.000528; 408.000816; 0.00; 0.00; 0.00; 0.00; 3 #22 x 34 in U.S. Survey Feet (times 12.000002) #Tabloid; 1; 10.60; 16.50; 0.20; 0.25; 0.20; 0.25; 1,3 #11x17 original inch dimensions