{"text_format":"1","workbook":"xlsx","n_sheets":3,"sheets":["Code_Info","Survey_Codes_Category_OLD","No_Longer_Used"],"not_rendered":{"charts":0,"images":331,"macros":1,"external_links":0,"defined_names":6,"comments":0,"pivot_tables":0},"unopened":[],"bounds":{"document_bytes":16777216,"sheet_cells":100000,"rows_first":2000,"rows_last":500,"rows_between":2000,"halvings":0,"cell_chars":16384,"cell_head_chars":4096},"cells_cut":0,"cells_raw":0,"read":"whole","date_system":"1900"}

{"sheet":"Code_Info","index":0,"n_rows":303,"n_cols":7,"rows_kept":303,"cut":false,"hidden":false,"merged":[]}
["CATEGORY","CODE","DESCRIPTION","CELL","ATTRIBUTES","DTM","SHOOT…."]
["AERIAL TARGETS","AERLCH","Aerial Lidar Check Shot Hard","Default \"+\"","Shot Location","DNI"]
["AERIAL TARGETS","AERLCS","Aerial Lidar Check Shot Soft","Default \"+\"","Shot Location","DNI"]
["AERIAL TARGETS","AERPP","Aerial Photo Point","VCTRL","Note1 - any notes\nNote2\nNote3","DNI","The desired photo point."]
["AERIAL TARGETS","AERTAR","Aerial Target Full","FCTRL","Target#","DNI","The center of the target."]
["AERIAL TARGETS","H","Hard Shot (LiDAR Control)\n","Default \"+\"","Shot Location","DNI"]
["AERIAL TARGETS","S","Soft Shot (LiDAR Control)","Default \"+\"","Vegetation Type\nVegetation Height\n","DNI"]
["BRIDGES","BD","Bridge Deck","Default \"+\"","Material\nThickness\nCondition\n","DNI","The perimeter of the bridge deck."]
["BRIDGES","BOB","Bottom of Beam","Default \"+\"","Type - type of beam?\n","DNI","The bottom of any beam."]
["BRIDGES","BRFLOOR","Bottom of Bridge Deck\n","Default \"+\"",null,"DNI","The perimeter of the bottom of the bridge deck."]
["BRIDGES","BRRAIL","Top of Bridge Rail","Default \"+\"","\n","DNI","The top of the bridge rail."]
["BRIDGES","BRSEAT","Beam Seat Elevation","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
["BRIDGES","PIER","Perimeter of Pier","Default \"+\"","\n","DNI","The perimeter of the piers."]
["BRIDGES","PIERCB","Pier Cap Bottom","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
["BRIDGES","PIERT","Top of Pier","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
["BRIDGES","WALLA","Abutment and Wingwall","Default \"+\"","Material\nLocation\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
["BUILDINGS","AC","Air Conditioner","AC",null,"DNI","The center on top."]
["BUILDINGS","BLD","Building Corner w/ DTM","Default \"+\"","Use - Commercial, Residential, Farm, etc.\nStory - number?\nConstruction - Frame, Masonry, etc.\nAddress - address?\n","VOID","The perimeter of the building.  Note: VOID areas must be closed."]
["BUILDINGS","BLD_2D","Building Corner w/o DTM","Default \"+\"","Use - Commercial, Residential, Farm, etc.\nStory - number?\nConstruction - Frame, Masonry, etc.\nAddress - address?\n","DNI","The corners of the building."]
["BUILDINGS","CANOPY","Canopy","Default \"+\"","Material\n","DNI","The corners of the canopy."]
["BUILDINGS","FF","Finished Floor Elevation","RRFROG",null,"DNI"]
["BUILDINGS","POR","Porch","Default \"+\"","Material - Material the porch is made of?\nCove - yes or no\n","VOID","The perimeter of the porch.  Note: VOID areas must be closed."]
["BUILDINGS","TF","Top of Foundation","Default \"+\"","\n","DNI","1 shot on each building for an elevation."]
["DATA CODES","FDAT","Any Notes for Field Data","Default \"+\"","Note1 - any notes\nNote2\nNote3\n","DNI","Use for any note you wish to put in the DGN file."]
["DATA CODES","RESRFDAT","Resurface Data","Default \"+\"","Adjustment Type - feather, adjustment to grade, no adjustment, reconstruct, engineer review\nNote - any notes\n","DNI","The item to associate with the resurfacing data."]
["DIVISIONS","OCCL","Occupation Line","Default \"+\"","Type - what type of occupation?\n","DNI","The points along the occupation line."]
["DIVISIONS","QCOR","Quarter Section Corner\n","SECHLF",null,"DNI","The top of the monument found."]
["DIVISIONS","SCOR","Section Corner","SECCOR","\n","DNI","The top of the monument found."]
["DRAINAGE","CB-2-2B","Catch Basin No. 2-2B","CB22B-X","P1\nP2\nP3\nP4\nP5\nN1","SPOT","Shoot the center of the grate.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CB-3","Curb Inlet No. 3","CB3-X",null,"SPOT","Shoot the low spot of the grate, at the face of curb in the center of the structure.         Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CB-4","Catch Basin No. 4","CB4-X",null,"SPOT","Center of the grate. If the grate is slanted, take a second shot at the low point using the FLTOP field code.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CB-5","Catch Basin No. 5","CB5-X",null,"SPOT","Center of the grate. If the grate is slanted, take a second shot at the low point using the FLTOP field code.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CB-6","Catch Basin No. 6","CB6-X",null,"SPOT","Back of grate.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CB-7","Catch Basin No. 7","CB7-X",null,"SPOT","Shoot the center of the grate. For domed grates, add the height of the dome (approximately 4”) to the rod height. A flat grate is used for the 3D model.                                                       Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CBDAT","Catch Basin Data","Default \"+\"","Material\nCondition\nSize\nType\n","DNI","Data for Catch Basin"]
["DRAINAGE","CBR","Catch Basin Round Generic code for a round catch basin. Use the same cell as the code CB-7","CB7-X",null,"SPOT","Shoot the center of the grate. For domed grates, add the height of the dome (approximately 4”) to the rod height. A flat grate is used for the 3D model.                                                       Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CBS","Catch Basin Square    Generic code for a square catch basin. Uses the same cell as the code CB-2-2B","CB22B-X",null,"SPOT","Shoot the center of the grate.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CI","Curb Inlet                    Generic code for a curb inlet. Uses the same cell as the code CB-3","CB3-X",null,"SPOT","Shoot the low spot of the grate, at the face of curb in the center of the structure.         Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","CMP","Corrugated Metal Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert.\n\nFor eliptical pipes, the size is entered in rize x span format. Example: 12x18"]
["DRAINAGE","CMPA","Corrugated Metal Pipe Arch","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert.\n\nFor eliptical pipes, the size is entered in rize x span format. Example: 12x18"]
["DRAINAGE","COUT","Pipe Clean Out","COUT-X","Use - Sanitary, Storm, etc.\nSize\n","DNI","The center."]
["DRAINAGE","CPP","Corrugated Plastic Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert using the BL* and EL* mapping codes.\n\nFor elliptical pipes, the size is entered in rise x span format. Example: 12x18"]
["DRAINAGE","CULV","Culvert","Default \"+\"",null,"DNI","Flow line at each end of a box culvert.  Attributes:                                                           Size:                                                                   Location:                                                                    Condition:"]
["DRAINAGE","D","Center of Ditch","Default \"+\"","\n","BREAK","The center of the ditch."]
["DRAINAGE","DP","Drive Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert using the BL* and EL* mapping codes.\n\nFor elliptical pipes, the size is entered in rise x span format. Example: 12x18"]
["DRAINAGE","DRAIN","Drain","FDRN-X","Type - Floor, Wall, etc.\nMaterial\n\n","SPOT","The center of the drain."]
["DRAINAGE","DRNT","Trench Drain","Default \"+\"","Width\n","BREAK","The ends of the drain."]
["DRAINAGE","DRYW","Dry Well for Storm Drainage","DRYW-X","Material\nDepth\nDiameter","DNI","The center of the lid."]
["DRAINAGE","FDO","For Direction Only","Default \"+\"","Note1 - any notes\nNote2\nNote3\n","DNI","Use to show direction for an object. Typically used to show the direction of a pipe when the other end cannot be located."]
["DRAINAGE","FLINE","Flow line of Drainage Structure\n","Default \"+\"",null,"DNI","The flow line of the drainage structure."]
["DRAINAGE","FLTOP","Low Elevation Point of Inlet Lid\n","Default \"+\"",null,"SPOT","The low point of the lid."]
["DRAINAGE","HWATER","High Water Elevation","BMCHS","Year - year of high water?\nBasis - what is it based on?\n","DNI","The ground at the location of the High Water Mark."]
["DRAINAGE","I-2-6","Median Inlet No. 2","I-26-X",null,"SPOT","Shoot the flow line elevation at the center of the opening. These inlets come in various sizes from 6’to 20’ in length, in 2’ increments.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN.\n"]
["DRAINAGE","I-3B","Median Inlet No. 3","I-3B-SS-X",null,"SPOT","Center of Grate.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN.\n"]
["DRAINAGE","I-4B","Median Inlet No. 4","I-4B-SS-X",null,"SPOT","Shoot the approximate center of the structure on top of the barrier. Measure the barrier height and\nadd that value to the rod height to set the elevation for the grate.                                                                      Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","MH-3","Storm Manhole","MH3-48D-X",null,"DNI","Shoot the center of the lid. The plan view cell origin is at the center of the base, not at the center of the lid. As a result, the manhole position will be shifted in relation to the survey shot at the center of the lid. The bigger the vault, the more the shift. Take a second shot at the approximate center of the base on the surface of the ground. Code this shot using the X2D feature code with a note to designate this as the actual center of the structure. In the office, edit the survey point to use the Northing and Easting coordinate of the X2D shot with the elevation from the shot on the lid.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","MI","Median Inlet               Generic code for a median inlet. Uses the same cells as the code I-3B","I-3B-SS-X",null,"SPOT","Center of Grate.\nAtributes P1-P5 and N1 are for field reference only and do not populate in the DGN.\n"]
["DRAINAGE","OHWM","Ordinary High Water Mark\n","BMCHS",null,"DNI","The edge of the water."]
["DRAINAGE","PCO","Precast Concrete Pipe Outlet","DM11-X","P1","DNI","The outlet of the pipe.\nAttributes P1 is used to define the pipe in the following format:   dip-size-material-direction\nThe dip value should be zero when the shot is on the invert. Use the diameter of the pipe if the shot is on the top of the pipe."]
["DRAINAGE","PIO","Pipe Inlet/Outlet","Default \"+\"","P1","DNI","The invert of the pipe.\nAttributes P1 is used to define the pipe in the following format:   dip-size-material-direction"]
["DRAINAGE","R","Edge of Rip Rap","Default \"+\"","\n","BREAK","The corners of the riprap."]
["DRAINAGE","RCP","Reinforced Concrete Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert using the BL* and EL* mapping codes.\n\nFor elliptical pipes, the size is entered in rise x span format. Example: 12x18"]
["DRAINAGE","RCPA","Reinforced Concrete Pipe Arch","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert using the BL* and EL* mapping codes.\n\nFor elliptical pipes, the size is entered in rise x span format. Example: 12x18"]
["DRAINAGE","RIVER","Edge of Water","Default \"+\"","\n","BREAK","The edge of the water."]
["DRAINAGE","SMP","Smooth Metal Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert.\n\nFor eliptical pipes, the size is entered in rize x span format. Example: 12x18"]
["DRAINAGE","SPP","Smooth Plastic Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert.\n\nFor eliptical pipes, the size is entered in rize x span format. Example: 12x18"]
["DRAINAGE","STMH","Storm Manhole           Generic code for a storm manhole. Uses the same cell as the code MH-3","MH3-48D-X",null,"DNI","Shoot the center of the lid. The plan view cell origin is at the center of the base, not at the center of the lid. As a result, the manhole position will be shifted in relation to the survey shot at the center of the lid. The bigger the vault, the more the shift. Take a second shot at the approximate center of the base on the surface of the ground. Code this shot using the X2D feature code with a note to designate this as the actual center of the structure. In the office, edit the survey point to use the Northing and Easting coordinate of the X2D shot with the elevation from the shot on the lid.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["DRAINAGE","SWAMP","Edge of Swamp","Default \"+\"","\n","BREAK","The corners of the swamp."]
["DRAINAGE","VCP","Vitrified Clay Pipe","Default \"+\"","Size - in inches\nLocation\nCondition\n","DNI","Shoot the ends of the pipe at the invert.\n\nFor eliptical pipes, the size is entered in rize x span format. Example: 12x18"]
["DRAINAGE","WALLH","Drainage Headwall","Default \"+\"","Material\nLocation\nCondition\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
["DTM FEATURES","B","Ground Break Line","Default \"+\"","\n","BREAK","The break line on the ground."]
["DTM FEATURES","ES","Edge of Slip","Default \"+\"","\n","BREAK","The edge of the slip."]
["DTM FEATURES","OG","Original Ground","Default \"+\"","\n","BREAK","The edge of grading."]
["DTM FEATURES","TB","Top of Bank","Default \"+\"","\n","BREAK","The top of the bank."]
["DTM FEATURES","TSL","Toe of Slope","Default \"+\"","\n","BREAK","The toe of the slope."]
["DTM FEATURES","VOID","Miscellaneous Void Areas\n","Default \"+\"","Note - any notes","VOID","The perimeter of whatever you want to be a void area in the DTM.  Note: VOID areas must be closed."]
["DTM FEATURES","X","Random Ground Spot w/ DTM","X",null,"SPOT","The ground at the locations desired."]
["DTM FEATURES","X_2D","Random Ground Spot w/o DTM","X",null,"DNI","The ground at the locations desired."]
["GEOMETRY","CCON","Centerline of Construction\n","Default \"+\"",null,"DNI","The monuments that control this line."]
["GEOMETRY","CS","Curve to Spiral","PC",null,"DNI","The monument that control this point."]
["GEOMETRY","CSURV","Centerline of Survey","Default \"+\"","\n","DNI","The monuments that control this line."]
["GEOMETRY","PC","Point of Curve","PC",null,"DNI","The monument that control this point."]
["GEOMETRY","PI","Point of Intersection","PI",null,"DNI","The monument that control this point."]
["GEOMETRY","POC","Point on Curve","PC",null,"DNI","The monument that controls this point."]
["GEOMETRY","POT","Point on Tangent","PC",null,"DNI","The monument that controls this point."]
["GEOMETRY","PT","Point Tangent","PC",null,"DNI","The monument that control this point."]
["GEOMETRY","SC","Spiral to Curve","PC",null,"DNI","The monument that controls this point."]
["GEOMETRY","ST","Spiral to Tangent","PC",null,"DNI","The monument that controls this point."]
["GEOMETRY","TS","Tangent to Spiral","PC",null,"DNI","The monument that controls this point."]
["GEOTECHNICAL","COAL","Coal Seam Line (Generic)\n","Default \"+\"",null,"DNI","The perimeter of the area."]
["GEOTECHNICAL","DMAS","Deep Mine Air or Pump Shaft","MINEAPSH",null,"DNI","The perimeter of the shaft."]
["GEOTECHNICAL","DME","Deep Mine Entry, Slope","MINESL",null,"DNI","The entry.  Dual code with FDO to show direction."]
["GEOTECHNICAL","DMED","Deep Mine Entry, Drift","MINEDR",null,"DNI","The entry.  Dual code with FDO to show direction."]
["GEOTECHNICAL","DMEDD","Deep Mine Entry Shaft, Drift with Discharge","MINEDRDL",null,"DNI","The entry.  Dual code with FDO to show direction."]
["GEOTECHNICAL","DMES","Deep Mine Entry Shaft","MINEENTSH",null,"DNI","The shaft."]
["GEOTECHNICAL","DMESD","Deep Mine Entry Shaft, Slope with Discharge","MINESLDL",null,"DNI","The shaft.  Dual code with FDO to show direction."]
["GEOTECHNICAL","DMS","Mine Subsidence, Point","MINESUB",null,"DNI","The center point, if possible."]
["GEOTECHNICAL","PILEBEAM","Steel Beam Pile for Soil Retention, Existing","BEAM_PILE","Length - Length of pile above ground\nLagging - Wood, steel, etc.\nOrient - angle relative to roadway\nBatter - batter angle\nSize - beam size\nNote - any notes","DNI","The top center of the pile."]
["GEOTECHNICAL","PILEPIPE","Steel Pipe Pile for Soil Retention, Existing","PIPE_PILE","Length - Length of pile above ground\nLagging - Wood, steel, etc.\nOrient - angle relative to roadway\nBatter - batter angle\nDiameter - pipe size\nNote - any notes","DNI","The top center of the pile."]
["GEOTECHNICAL","RLINE","Rock Outcrop Line","Default \"+\"","\n","SPOT","Edge of the rock."]
["GEOTECHNICAL","SMH","Surface Mine Highwall\n","Default \"+\"",null,"BREAK","The edge of the highwall."]
["GEOTECHNICAL","SOIL","Soil Boring Project","SOILB_PROJ",null,"DNI","The center of the boring."]
["GEOTECHNICAL","SOILINST","Soil Boring Instrumented","SOILB_INST",null,"DNI","The center of the boring."]
["GEOTECHNICAL","SOILTARG","Soil Boring Target","SOILB_TARGET",null,"DNI","The center of the target."]
["GEOTECHNICAL","SPRD","Spring, Developed","SPRINGDL",null,"DNI","The point where the water leaves the ground.  Shoot an FDO shot to show direction or use RIVER to show the flow."]
["GEOTECHNICAL","SPRU","Spring, Undeveloped","SPRINGUL",null,"DNI","The point where the water leaves the ground.  Shoot an FDO shot to show direction or use RIVER to show the flow."]
["GEOTECHNICAL","WDG","Water Well Dug","WWD","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["GEOTECHNICAL","WDL","Water Well Drilled w/o Well Log","WW","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["GEOTECHNICAL","WDWL","Water Well Drilled w/Well Log","WWL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["GEOTECHNICAL","WELLM","Monitoring Well","MWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["LIGHTING","CCPC","Control Center Power Center Base","CCPS",null,"DNI","The center of the base."]
["LIGHTING","LPB","Lighting Pull Box","PBJB",null,"DNI","The center of the pull box."]
["LIGHTING","LPOLE","Light Pole","LPOLE","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the base at the ground."]
["OFFICE USE","SOILHIST","Soil Boring Historic","SOILB_HIST",null,"DNI","The center of the boring."]
["LIGHTING","TOWLGT","High Mast Tower Light","HMS","Luminaries - number of luminaries\nPole# - number on pole\n","DNI","The center of the base."]
["PAVEMENT","C","Edge of Curb","Default \"+\"","Width\nMaterial - concrete, asphalt, etc.\n","BREAK","The back edge of the curb."]
["PAVEMENT","CP","Pavement Crown","Default \"+\"","\n","BREAK","The center of the pavement at the crown."]
["PAVEMENT","DR","Edge of Drive","Default \"+\"","Material - concrete, asphalt, etc.\nType - field, residential, etc.\n","BREAK","The edge of the drive."]
["PAVEMENT","EB","Edge of Berm","Default \"+\"","Material\nDepth\n","BREAK","The edge of the aggregate shoulder."]
["PAVEMENT","EP","Edge of Pavement","Default \"+\"","Material\nDepth\n","BREAK","The edges of the pavement."]
["PAVEMENT","EPS","Edge of Paved Shoulder","Default \"+\"","Material\nDepth\n","BREAK","The edge of the paved shoulder."]
["PAVEMENT","GUT","Edge of Gutter","Default \"+\"","\n","BREAK","The edge of the gutter. (bottom of curb)"]
["PAVEMENT","RPM","Raised Pavement Marker",null,null,"DNI","Center of Pavement Marker"]
["PAVEMENT","STEPS","Steps w/ DTM","Default \"+\"","Material - steps are made from?\nNumber - number of steps?\nTread - tread width?\n","BREAK","The perimeter of the steps on the ground, or each step as required."]
["PAVEMENT","STEPS_2D","Steps w/o DTM","Default \"+\"","Material - steps are made from?\nNumber - number of steps?\nTread - tread width?\n","DNI","The perimeter of the steps on the ground, or each step as required.  Use this code for steps that are not on the ground, such as a fire escape.\n"]
["PAVEMENT","WALK","Edge of Walk w/ DTM\n","Default \"+\"","Material\n","BREAK","The edges of the walk."]
["PAVEMENT","WALK_2D","Edge of Walk w/o DTM\n","Default \"+\"","Material\n","DNI","The edges of the walk."]
["PAVEMENT MARKINGS","PAINTL","Painted Line on Pavement","Default \"+\"","Color - white, yellow, other\nType - solid, dashed, other\nNote - any notes\n","DNI","The deflections, begin, end, etc. of the line."]
["PAVEMENT MARKINGS","PAINTS","Painted Stop Bar","Default \"+\"","\n","DNI","The perimeter of the stop bar."]
["PAVEMENT MARKINGS","PMHS","Handicap Symbol","PMHS",null,"DNI","The top center of the symbol."]
["PAVEMENT MARKINGS","PMLT","Left Turn Arrow","PMLFT",null,"DNI","The top of the arrow."]
["PAVEMENT MARKINGS","PMONLY","Word on Pavement “ONLY”","PMON6",null,"DNI","The top center of the word."]
["PAVEMENT MARKINGS","PMRR","Railroad Crossing","PMRR8",null,"DNI","The center of “X” symbol."]
["PAVEMENT MARKINGS","PMRT","Right Turn Arrow","PMRT",null,"DNI","The top of the arrow."]
["PAVEMENT MARKINGS","PMSCHOOL","Word on Pavement “SCHOOL”","PMSC6",null,"DNI","The top center of the word."]
["PAVEMENT MARKINGS","PMSTOP","Word on Pavement “STOP”","PMST6",null,"DNI","The top center of the word."]
["PAVEMENT MARKINGS","PMTH","Thru Arrow","PMTHR",null,"DNI","The top of the arrow."]
["RAILROAD","FROG","Point of Railroad Frog","RRFROG",null,"DNI","The point where rails cross in a switch."]
["RAILROAD","RAIL","Top Center of Rails","Default \"+\"","Type\nCondition\nHeight\n","DNI","The top center of both rails."]
["RAILROAD","RAILC","Top Center of Tie between Rails","Default \"+\"","Type\nCondition\nHeight\n","DNI","The top center of the ties between the rails."]
["RAILROAD","RAILPS","Point of Rail Switch","RRAILPS",null,"DNI","The switch where turnout begins."]
["RAILROAD","RRX","Rail Road Crossing Signal","RRS","Type - crossbuck, signal, gate, buckeye, etc.","DNI","The center of the base."]
["RIGHT-OF-WAY","CRW","Centerline of Right of Way\n","Default \"+\"",null,"DNI","The monuments that control this line."]
["RIGHT-OF-WAY","RW","Right of Way","Default \"+\"","\n","DNI","The monuments that control this line."]
["ROADWAY","BB","Bumper Blocks (Parking Lot Block)\n","Default \"+\"",null,"DNI","Each end of the block."]
["ROADWAY","BO","Bollard","BO",null,"DNI","The center of the Bollard"]
["ROADWAY","BROCK","Perimeter of Bedrock","Default \"+\"",null,"BREAK","The perimeter of the exposed bed rock at the ground.\n"]
["ROADWAY","CBAR","Concrete Barrier","Default \"+\"","\n","BREAK","The center of the top of the barrier."]
["ROADWAY","FEN","Fence w/ DTM","Default \"+\"","Type - wire, wood, etc.\nHeight\nOwner - ODOT, private\n","SPOT","The base of the fence on the ground."]
["ROADWAY","FEN_2D","Fence w/o DTM","Default \"+\"","Type - wire, wood, etc.\nHeight\nOwner - ODOT, private\n","DNI","The base of the fence on the ground."]
["ROADWAY","FLAG","Flag Pole","FLAGP","Material - Aluminum, Steel, Wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the base."]
["ROADWAY","GATE","Fence Gate","Default \"+\"","\n","DNI","Each end of the gate."]
["ROADWAY","GRBAR","Guardrail Barrier","Default \"+\"","Height","SPOT","The ground at the post. Guard rail on both sides."]
["ROADWAY","GRBAR_2D","Guardrail Barrier","Default \"+\"","Height","DNI","The ground at the post. Guard rail on both sides."]
["ROADWAY","GRCAB","Guardrail Cable Barrier\n","Default \"+\"","Height","DNI","The ground at the post."]
["ROADWAY","GRILL","Stationary Barbeque Grill","BBQ",null,"DNI","The center of the support at the ground."]
["ROADWAY","GRLT","Guardrail Left","Default \"+\"","Height","SPOT","The ground at the face of the guard rail. Guard rail post to the left of the rail as you are taking shots.\n"]
["ROADWAY","GRLT_2D","Guardrail Left on Bridge","Default \"+\"","Height","DNI","The ground at the face of the guard rail. Guard rail post to the left of the rail as you are taking shots.\n"]
["ROADWAY","GRRT","Guardrail Right","Default \"+\"","Height","SPOT","The ground at the face of the guard rail. Guard rail post to the right of the rail as you are taking shots.\n"]
["ROADWAY","GRRT_2D","Guardrail Right on Bridge","Default \"+\"","Height","DNI","The ground at the face of the guard rail. Guard rail post to the right of the rail as you are taking shots.\n"]
["ROADWAY","HSTONE","Headstone (Grave Marker)","RIP","Width\nLength\nHeight\n","DNI","The top center of the head stone."]
["ROADWAY","LINE","Connect points around an object w/ DTM\n","Default \"+\"","Note - what is it?","SPOT","The corners of the object."]
["ROADWAY","LINE_2D","Connect points around an object w/o DTM\n","Default \"+\"","Note - what is it?","DNI","The corners of the object."]
["ROADWAY","MB","Mail Box","MB","Post Material\nSize - size of post\n","DNI","The center of the post at the ground."]
["ROADWAY","MISC","Miscellaneous Item Found","UOBJ","Note - what is it?\nDepth - depth below surface?\n","DNI","The center of the object."]
["ROADWAY","PAD","Pad Existing","Default \"+\"","Note - what is it for?\nMaterial - concrete, asphalt, etc.\n","BREAK","The corners of the pad."]
["ROADWAY","PAD_2D","Pad Existing","Default \"+\"","Note - what is it for?\nMaterial - concrete, asphalt, etc.\n","DNI","The corners of the pad."]
["ROADWAY","PB","News Paper Box","PB","Post Material\nSize - size of post\n","DNI","The center of the post at the base."]
["ROADWAY","PMTR","Parking Meter","PM",null,"DNI","The center of the meter."]
["ROADWAY","POST","Any type of Post","POST","Use - fence, guard, etc.\nSize - diameter of post?\nMaterial - concrete, steel, etc.\n","DNI","The center of the post at the ground. (use offset if needed)"]
["ROADWAY","ROCK","Large Rock","ROCK","Note - any notes","DNI","The top center of the rock."]
["ROADWAY","SD","Satellite Dish","SATD","Size - diameter of dish?\nDiameter - diameter of post?\n","DNI"," The center of the post at the ground."]
["ROADWAY","SPKHD","Sprinkler Head","SPKHD",null,"DNI","The top of the head."]
["ROADWAY","WALLR","Retaining Wall","Default \"+\"","Material\nLocation\nCondition\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
["ROADWAY","YLITE","Yard Lite - low to the ground","BUDLIT",null,"DNI","The center of the top."]
["SIGNALS","CPED","Traffic signal Controller Base Mt","CBM",null,"DNI","The center of the base."]
["SIGNALS","CPM","Traffic Signal Controller Pole Mt","CPM",null,"DNI","The center of the base."]
["SIGNALS","SGPED","Signal Pedestal","SPED",null,"DNI","The center of the base."]
["SIGNALS","SGPOLE","Signal Support Pole","SPOLE","Type\nLength - length of cantilever?\n","DNI","The center of the base."]
["SIGNALS","TPB","Traffic Pull Box","SIGPB",null,"DNI","The center of the pull box."]
["SIGNALS","TRL","Traffic Line","Default \"+\"","\n","DNI"]
["SIGNALS","TRMH","Traffic Manhole","TRAFFIC_MH",null,"DNI","The center of the lid, on top."]
["SIGNALS","WIRE","Loop Detector","Default \"+\"","\n","DNI","The loop detectors in a linear fashion."]
["SIGNING","BILLBO","Billboard","Default \"+\"","Permit#\nNote - any notes\n","DNI","The perimeter of the billboard."]
["SIGNING","OCSS","Overhead Cantilever Sign Support","Default \"+\"","Length - length of cantilever?\nClearance - Clearance above pavement?\n","DNI","The perimeter of the base."]
["SIGNING","OSSS","Overhead Structure Mounted Sign \n","Default \"+\"",null,"DNI","Both ends of the mounting systems."]
["SIGNING","OTSS","Overhead Truss Sign Support\n","Default \"+\"",null,"DNI","The outside corners of the truss."]
["SIGNING","SIGNPB","Sign Public","SGN1P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\nFor SIGNPB, enter the following:\nSign # from Sign Design manual?\nNumber of posts?\n"]
["SIGNING","SIGNPB2","Sign Public 2 Post","SGN3P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\nFor SIGNPB, enter the following:\nSign # from Sign Design manual?\n"]
["SIGNING","SIGNPB3","Sign Public 3 Post","SGN3P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\nFor SIGNPB, enter the following:\nSign # from Sign Design manual?\n"]
["SIGNING","SIGNPR","Sign Private","SGN1P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\n"]
["SIGNING","SIGNPR2","Sign Private 2 Post","SGN2P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\n"]
["SIGNING","SIGNPR3","Sign Private 3 Post","SGN3P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign.\n"]
["SIGNING","SLIGHT","Sign Luminaire","SGNL",null,"DNI","The center of the light."]
["SURVEY CONTROL","BM","Benchmark Found","BM","Description - Describe the BM\nLocation - Location of the BM\nNote - any notes\n","DNI","The bench mark."]
["SURVEY CONTROL","CALPT","Calculated Point","X",null,"DNI","This is for laying out calculated points, or to show a calculated point in COGO."]
["SURVEY CONTROL","CGSF","Cotton Gin Spike Found","GSPK","Depth\nNote - any notes\n","DNI","The center top of the spike."]
["SURVEY CONTROL","CGSS","Cotton Gin Spike Set","GSPKS","Note - any notes","DNI","The center top of the spike."]
["SURVEY CONTROL","CNPT","Miscellaneous Control Point","PC","Note - any notes","DNI","Center of the control point."]
["SURVEY CONTROL","CONDAT","Control Points Data","Default \"+\"","Note1 - any notes\nNote2\nNote3\nNote4\n","DNI","Use for information to plot in the DGN file about all Control Points/Property Pins, etc."]
["SURVEY CONTROL","CUT","Cross Cut Found","BMCHS",null,"DNI","Center of cross."]
["SURVEY CONTROL","CUTS","Cross Cut Set","BMCHSS",null,"DNI","Center of cross."]
["SURVEY CONTROL","DRILLH","Drill Hole Found","DHOLE",null,"DNI","The center of the hole."]
["SURVEY CONTROL","DRILLHS","Drill Hole Set","DHOLES",null,"DNI","The center of the hole."]
["SURVEY CONTROL","GOVCON","Government Control Point Found","GOVD","Depth - depth below surface\nDescription - Describe the monument\nNote - any notes\n","DNI","The center of the point."]
["SURVEY CONTROL","GOVCONS","Government Control Point Set","GOVDS","Description - Describe the monument\nNote - any notes\n","DNI","The center of the point."]
["SURVEY CONTROL","HUB","Tacked Hub Found","HUBT",null,"DNI","The top of the tack."]
["SURVEY CONTROL","HUBSET","Tacked Hub Set","HUBTS",null,"DNI","The top of the tack."]
["SURVEY CONTROL","MAG","Mag Nail Found","MNAIL","Depth\nNote - any notes\n","DNI","The top of the nail."]
["SURVEY CONTROL","MAGS","Mag Nail Set","MNAILS","Note - any notes","DNI","The top of the nail."]
["SURVEY CONTROL","NAIL","Carpenter’s Nail Found","NAIL","Depth\nNote - any notes\n","DNI","The center of the top of the nail."]
["SURVEY CONTROL","PK","PK Nail Found","PKNAIL","Depth\nNote - any notes\n","DNI","The top of the nail."]
["SURVEY CONTROL","PKS","PK Nail Set","PKNALS","Note - any notes\n","DNI","The top of the nail."]
["SURVEY CONTROL","RSPK","Rail Road Spike Found","RRSPK","Depth\nNote - any notes\n","DNI","The top of the spike."]
["SURVEY CONTROL","RSPKS","Rail Road Spike Set","RRSPKS","Note - any notes\n","DNI","The top of the spike."]
["SURVEY CONTROL","SMSF","Survey Marker Spike Found","RRFROG","Depth - depth of marker\nNote - any notes","DNI","The center of the marker."]
["SURVEY CONTROL","SMSS","Survey Marker Spike Set","RRFROG","Note - any notes","DNI","The center of the marker."]
["SURVEY MONUMENTS","AXLE","Axle Found","AXLE","Depth - depth below surface\nNote - any notes\n","DNI"]
["SURVEY MONUMENTS","CMON","Concrete Monument Found","MON","Depth - depth below surface\nNote - any notes\n","DNI","A concrete monument found."]
["SURVEY MONUMENTS","CMONS","Concrete Monument Set","MONP","Depth - depth below surface\nNote - any notes\n","DNI","Concrete monument set by ODOT or consultant Forces."]
["SURVEY MONUMENTS","CSF","Corner Stone Found","STONE","Depth - depth below surface\nNote - any notes\n","DNI","Center of high point or the mark on the stone."]
["SURVEY MONUMENTS","IPID","Iron Pin & Cap Found","IPID","Size\nName\nNumber\nDepth\nNote - any notes\n","DNI","The center of the top of the pin."]
["SURVEY MONUMENTS","IPIN","Iron Pin Found","IPF","Size\nDepth\nNote - any notes\n","DNI","The center of the top of the pin."]
["SURVEY MONUMENTS","IPINS","Iron Pin Set","IPS","Size\nName\nNumber\nNote - any notes\n","DNI","The center of the top of the pin."]
["SURVEY MONUMENTS","IPIPE","Iron Pipe Found","IPIPE","Size\nName\nNumber\nDepth\nNote - any notes\n","DNI","The center of the top of the pipe."]
["SURVEY MONUMENTS","IPIPES","Iron Pipe Set","IPIPES","Size\nName\nNumber\nNote - any notes\n","DNI","The center of the top of the pipe."]
["SURVEY MONUMENTS","MONBOX","Monument Box Found","MONBX","Size\nName\nNumber\nNote - any notes\n","DNI","The top of the iron pin in the monument box."]
["SURVEY MONUMENTS","MONBOXS","Monument Box Set","MONBXP","Size\nName\nNumber\nNote - any notes\n","DNI","The top of the iron pin in the monument box."]
["SURVEY MONUMENTS","MSPK","Mine Spike Found","MSPK","Depth\nNote - any notes\n","DNI","The center of the top of the spike."]
["SURVEY MONUMENTS","MSPKS","Mine Spike Set","MSPKS","Note - any notes\n","DNI","The center of the top of the spike."]
["SURVEY MONUMENTS","TBAR","T-Bar Found","TBAR","Name\nNumber\nDepth\nNote - any notes\n","DNI"]
["UTILITIES - CABLE TV","CTVA","Cable TV Amplifier","CTVA",null,"DNI","The base of the post at the ground."]
["UTILITIES - CABLE TV","CTVL","Cable TV Line","Default \"+\"","Location - overhead / underground?\nType - conventional / fiber optic?\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - CABLE TV","FO","Fiber Optic Line","Default \"+\"","Note1 - any notes\nNote2\n","DNI","The location of the line."]
["UTILITIES - CABLE TV","FOMH","Fiber Optic Manhole","FOMH","\n","DNI","The center of the Fiber Optic Manhole"]
["UTILITIES - ELECTRIC","EME","Electric Meter","EM","Utility - name of utility company\nNote - any notes\n","DNI","The top of the meter."]
["UTILITIES - ELECTRIC","EMH","Electric Manhole","EMH","Note1 - any notes\nNote2\n","DNI","The center of the lid on top."]
["UTILITIES - ELECTRIC","EPB","Electric Pull Box","EBOX",null,"DNI","The center of the Pull Box."]
["UTILITIES - ELECTRIC","ETRANS","Pad Mounted Transformer","ETRANS",null,"DNI","The top center of the cabinet."]
["UTILITIES - ELECTRIC","PL","Power Line","Default \"+\"","Location - overhead / underground?\nVoltage - voltage on the line\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - ELECTRIC","PLM","Power Line Marker","PMRK","Utility - name of utility company\nNote - any notes\n","DNI","The top of the marker."]
["UTILITIES - ELECTRIC","PLP","Power and Light Pole","PLP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the pole at ground level."]
["UTILITIES - ELECTRIC","PP","Power Pole","PP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the pole at ground level."]
["UTILITIES - ELECTRIC","UBOX","Electric Riser/Pedestal /Box","EBOX","Utility - name of utility company\nSize\n","DNI","The top of the box in the center."]
["UTILITIES - GAS","GL","Gas Line","Default \"+\"","Size\nMaterial\nPressure\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - GAS","GLM","Gas Line Marker","GMRK","Utility - name of utility company\nSize\n","DNI","The top of the marker."]
["UTILITIES - GAS","GLV","Gas Line Vent","GVENT",null,"DNI","The top of the vent."]
["UTILITIES - GAS","GME","Gas Meter","GM","Size - diameter of pipe\nNote - any notes\n","DNI","The top of the meter cover."]
["UTILITIES - GAS","GMH","Gas Manhole","GMH","Material - material of manhole\nNote - any notes\n","DNI","The center of the lid on top."]
["UTILITIES - GAS","GSV","Gas Service Valve\n(Curb Shutoff)\n","GSS","Note - any notes","DNI","The center of the valve."]
["UTILITIES - GAS","GVALVE","Gas Valve","GV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The top of the riser."]
["UTILITIES - GAS","WELLG","Gas Well","GWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["UTILITIES - MISC","CISTERN","Cistern","Default \"+\"","\n","DNI","The top perimeter."]
["UTILITIES - MISC","DM","Guy Wire Anchor (Deadman)","DM",null,"DNI","The ground where the anchor enters."]
["UTILITIES - MISC","FOM","Fiber Optic","FO",null,"DNI","The center of the Fiber Optic line marker"]
["UTILITIES - MISC","LE","Leach Bed","Default \"+\"","Depth - how deep is the tile\nSize - what size is the tile\n","SPOT","The perimeter of the leach bed area."]
["UTILITIES - MISC","PPUMP","Petroleum Pump","GPUMP","Material Type - type of material pumped","DNI","The top of the pump."]
["UTILITIES - MISC","TANK","Tank","Default \"+\"","Material Type - Material in tank\nTank Type - Material of tank\nLocation - above/below ground\n","DNI","The perimeter of the tank."]
["UTILITIES - MISC","TFC","Tank Filler Cap","TNKCAP","Material Type - Material in tank","DNI","The top of the filler cap."]
["UTILITIES - MISC","TOWER","Any type of tower","TOWER","Use - what is the tower used for?\nMaterial - what material is the tower constructed of?\nSize - diameter/size of the tower?\n","DNI","Center of base. (use offset if needed)"]
["UTILITIES - MISC","UMH","Unknown Manhole","UMH","Note1 - any notes\nNote2\nNote3\n","DNI","The center of the lid on top."]
["UTILITIES - MISC","UP","Unknown Pole","UP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
["UTILITIES - MISC","UPB","Unknown Pull Box","UBOX",null,"DNI","The base of the pole at the ground."]
["UTILITIES - MISC","VALVE","Miscellaneous Utility Valve","UVALVE","Utility - name of utility company\nSize - size of pipe\nNote - any notes\n","DNI","The top of the riser."]
["UTILITIES - MISC","WELLO","Oil Well","OWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["UTILITIES - MISC","WELLU","Unknown Well","UWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["UTILITIES - SANITARY","MH-3-SAN","Sanitary Manhole","MH1D-X-SAN",null,"DNI","Shoot the center of the lid. The plan view cell origin is at the center of the base, not at the center of the lid. As a result, the manhole position will be shifted in relation to the survey shot at the center of the lid. The bigger the vault, the more the shift. Take a second shot at the approximate center of the base on the surface of the ground. Code this shot using the X2D feature code with a note to designate this as the actual center of the structure. In the office, edit the survey point to use the Northing and Easting coordinate of the X2D shot with the elevation from the shot on the lid.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["UTILITIES - SANITARY","SEPTIC","Septic Tank","SEPTC",null,"DNI","Shoot the top of the lid."]
["UTILITIES - SANITARY","SSL","Sanitary Gravity Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - SANITARY","SSM","Sanitary Line Marker","SSMRK","Utility\nNote\n","DNI","The top of the marker."]
["UTILITIES - SANITARY","SSMH","Sanitary Manhole        Generic sanitary manhole code. Places the same cell as the code MH-3-SAN","MH1D-X-SAN",null,"DNI","Shoot the center of the lid. The plan view cell origin is at the center of the base, not at the center of the lid. As a result, the manhole position will be shifted in relation to the survey shot at the center of the lid. The bigger the vault, the more the shift. Take a second shot at the approximate center of the base on the surface of the ground. Code this shot using the X2D feature code with a note to designate this as the actual center of the structure. In the office, edit the survey point to use the Northing and Easting coordinate of the X2D shot with the elevation from the shot on the lid.                             Atributes P1-P5 and N1 are for field reference only and do not populate in the DGN."]
["UTILITIES - SANITARY","SSPL","Sanitary Pressure Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nPressure - pressure in line\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - SANITARY","SSV","Sanitary Line Vent","SVENT",null,"DNI","The top of the vent."]
["UTILITIES - SANITARY","SSVALVE","Sanitary Valve","SV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The top of the riser."]
["UTILITIES - TELECOMMUNICATIONS","CSB","Cell Service Booster","CSB","\n","DNI","The center below the Cell Service Booster"]
["UTILITIES - TELECOMMUNICATIONS","PHBO","Telephone Booth","TBTH",null,"DNI","The center of the phone booth on the ground."]
["UTILITIES - TELECOMMUNICATIONS","PHONE","Pay Telephone ","PPHONE",null,"DNI","The center of the phone booth on the ground."]
["UTILITIES - TELECOMMUNICATIONS","TBOX","Telephone Riser/Pedestal /Box","TPED","Utility - name of utility company\nSize\n","DNI","The top of the box in the center."]
["UTILITIES - TELECOMMUNICATIONS","TL","Telephone Line","Default \"+\"","Location - overhead / underground?\nType - conventional / fiber optic?\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - TELECOMMUNICATIONS","TLM","Telephone Line Marker","TMRK","Utility - name of utility company\nNote - any notes\n","DNI","The top of the marker."]
["UTILITIES - TELECOMMUNICATIONS","TLP","Telephone/Light Pole","TLGT","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
["UTILITIES - TELECOMMUNICATIONS","TMH","Telephone Manhole","TMH","Note1 - any notes\nNote2\n","DNI","The center of the lid on top."]
["UTILITIES - TELECOMMUNICATIONS","TP","Telephone Pole","TELP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
["UTILITIES - TELECOMMUNICATIONS","TPP","Power and Telephone Pole","TPW","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
["UTILITIES - WATER","FC","Fire Connection","FC","\n","DNI","The center in front of the Fire Connection"]
["UTILITIES - WATER","FH","Fire Hydrant","FH",null,"DNI","The center of the top."]
["UTILITIES - WATER","SCV","Sprinkler Control Valve","SCV",null,"DNI","The center of the Sprinkler Control Valve"]
["UTILITIES - WATER","WL","Water Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nPressure - pressure in line\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - WATER","WLM","Water Line Marker","WLM","Utility - name of utility company\nNote - any notes\n","DNI","The center of the marker."]
["UTILITIES - WATER","WLV","Water Line Vent","WVENT",null,"DNI","The top of the vent."]
["UTILITIES - WATER","WME","Water Meter","WM","Size - diameter of pipe\nNote - any notes\n","DNI","The top of the meter cover."]
["UTILITIES - WATER","WMH","Water Manhole","WMH","Material - material of manhole\nNote - any notes\n","DNI","The center of the lid on top."]
["UTILITIES - WATER","WSV","Water Service Valve","WSS","Note - any notes","DNI","The center of the valve."]
["UTILITIES - WATER","WVALVE","Water Gate Valve","WGV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The center of the valve."]
["VEGETATION","BUSH","Bush or Shrub","SHRUB",null,"DNI","The center of the bush/shrub."]
["VEGETATION","FB","Flower Bed","Default \"+\"","\n","BREAK","The perimeter of the bed."]
["VEGETATION","FBR","Raised Flower Bed or Planter","Default \"+\"","Material - aluminum, steel, wood, etc.\nNote - any notes\n","DNI","The perimeter of the bed / planter."]
["VEGETATION","HEDGER","Hedge Row","Default \"+\"",null,"DNI","The perimeter of the hedge row in a clockwise direction.\n"]
["VEGETATION","STUMP","Stump","STUMP","Size - diameter of stump","DNI","The top center of the stump."]
["VEGETATION","T","Deciduous Tree","TREE","Size - diameter of stump\nType - kind of tree\n","DNI","The center of the tree."]
["VEGETATION","TE","Evergreen Tree","ETREE","Size - diameter of stump\nType - kind of tree\n","DNI","The center of the tree."]
["VEGETATION","WOODSL","Woods Left","Default \"+\"",null,"DNI","The arcs of woods plotted on the left side as you’re walking.\n"]
["VEGETATION","WOODSR","Woods Right","Default \"+\"",null,"DNI","The arcs of woods plotted on the right side as you’re walking.\n"]

{"sheet":"Survey_Codes_Category_OLD","index":1,"n_rows":287,"n_cols":7,"rows_kept":287,"cut":false,"hidden":false,"merged":[[51,0,60,0],[1,0,4,0],[5,0,10,0],[11,0,13,0],[14,0,20,0],[21,0,22,0],[23,0,25,0],[26,0,30,0],[31,0,40,0],[41,0,50,0],[132,0,136,0],[61,0,66,0],[67,0,70,0],[71,0,75,0],[76,0,80,0],[81,0,86,0],[87,0,90,0],[91,0,100,0],[101,0,107,0],[108,0,110,0],[112,0,120,0],[122,0,130,0],[201,0,206,0],[137,0,138,0],[139,0,140,0],[141,0,150,0],[151,0,160,0],[161,0,168,0],[169,0,170,0],[171,0,176,0],[177,0,180,0],[181,0,183,0],[184,0,190,0],[191,0,200,0],[281,0,286,0],[207,0,210,0],[211,0,220,0],[221,0,222,0],[223,0,230,0],[232,0,239,0],[241,0,250,0],[251,0,253,0],[254,0,260,0],[261,0,269,0],[271,0,277,0],[278,0,280,0]]}
[null,"CODE","DESCRIPTION","CELL","ATTRIBUTES","DTM","SHOOT…."]
["AERIAL TARGETS","AERPP","Aerial Photo Point","VCTRL","Note1 - any notes\nNote2\nNote3","DNI","The desired photo point."]
[null,"AERTAR","Aerial Target Full","FCTRL","Target#","DNI","The center of the target."]
[null,"H","Hard Shot (LiDAR Control)\n","Default \"+\"","Shot Location","DNI"]
[null,"S","Soft Shot (LiDAR Control)","Default \"+\"","Vegetation Type\nVegetation Height\n","DNI"]
["BRIDGES","BD","Bridge Deck","Default \"+\"","Material\nThickness\nCondition\n","DNI","The perimeter of the bridge deck."]
[null,"BOB","Bottom of Beam","Default \"+\"","Type - type of beam?\n","DNI","The bottom of any beam."]
[null,"BRFLOOR","Bottom of Bridge Deck\n","Default \"+\"",null,"DNI","The perimeter of the bottom of the bridge deck."]
[null,"BRRAIL","Top of Bridge Rail","Default \"+\"","\n","DNI","The top of the bridge rail."]
[null,"BRSEAT","Beam Seat Elevation","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
[null,"PIER","Perimeter of Pier","Default \"+\"","\n","DNI","The perimeter of the piers."]
["BRIDGES","PIERCB","Pier Cap Bottom","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
[null,"PIERT","Top of Pier","Default \"+\"","\n","DNI","See Bridge Survey Instructions."]
[null,"WALLA","Abutment and Wingwall","Default \"+\"","Material\nLocation\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
["BUILDINGS","AC","Air Conditioner","AC",null,"DNI","The center on top."]
[null,"BLD","Building Corner w/ DTM","Default \"+\"","Use - Commercial, Residential, Farm, etc.\nStory - number?\nConstruction - Frame, Masonry, etc.\nAddress - address?\n","VOID","The perimeter of the building.  Note: VOID areas must be closed."]
[null,"BLD2D","Building Corner w/o DTM","Default \"+\"","Use - Commercial, Residential, Farm, etc.\nStory - number?\nConstruction - Frame, Masonry, etc.\nAddress - address?\n","DNI","The corners of the building."]
[null,"CANOPY","Canopy","Default \"+\"","Material\n","DNI","The corners of the canopy."]
[null,"FF","Finished Floor Elevation","RRFROG",null,"DNI"]
[null,"POR","Porch","Default \"+\"","Material - Material the porch is made of?\nCove - yes or no\n","VOID","The perimeter of the porch.  Note: VOID areas must be closed."]
[null,"TF","Top of Foundation","Default \"+\"","\n","DNI","1 shot on each building for an elevation."]
["DATA CODES","FDAT","Any Notes for Field Data","Default \"+\"","Note1 - any notes\nNote2\nNote3\n","DNI","Use for any note you wish to put in the DGN file."]
[null,"RESRFDAT","Resurface Data","Default \"+\"","Adjustment Type - feather, adjustment to grade, no adjustment, reconstruct, engineer review\nNote - any notes\n","DNI","The item to associate with the resurfacing data."]
["DIVISIONS","OCCL","Occupation Line","Default \"+\"","Type - what type of occupation?\n","DNI","The points along the occupation line."]
[null,"QCOR","Quarter Section Corner\n","SECHLF",null,"DNI","The top of the monument found."]
[null,"SCOR","Section Corner","SECCOR","\n","DNI","The top of the monument found."]
["DRAINAGE","CB-2-2B","Catch Basin No. 2-2B","CB22B-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","The center of the grate.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"CB-3","Curb Inlet No. 3","CB3-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","The low spot of the grate, at the face of curb in the center of the structure\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction"]
[null,"CB-4","Catch Basin No. 4","CB4-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Center of the grate. If the grate is slanted, take a second shot at the low point using the FLTOP field code.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction"]
[null,"CB-5","Catch Basin No. 5","CB5-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Center of the grate. If the grate is slanted, take a second shot at the low point using the FLTOP field code.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction"]
[null,"CB-6","Catch Basin No. 6","CB6-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Back of grate.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction"]
["DRAINAGE","CB-7","Catch Basin No. 7","CB7-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","The top center, if dome grate use offset.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"CBDAT","Catch Basin Data","Default \"+\"","Material\nCondition\nSize\nType\n","DNI","Dual code with CBR, CBS, CI, or MI."]
[null,"CBR","Round Inlet","CB7-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","The top center, if dome grate use offset.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"CBS","Square Catch Basin","CB22B-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","The center of the grate.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"CI","Curb Inlet","CB3-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Attributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"CMP","Corrugated Metal Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"CMPA","Corrugated Metal Pipe Arch","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"COUT","Pipe Clean Out","COUT-X","Use - Sanitary, Storm, etc.\nSize\n","DNI","The center."]
[null,"CPP","Corrugated Plastic Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"CULV","Culvert","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the culvert at the invert."]
["DRAINAGE","D","Center of Ditch","Default \"+\"","\n","BREAK","The center of the ditch."]
[null,"DP","Drive Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"DRAIN","Drain","FDRN-X","Type - Floor, Wall, etc.\nMaterial\n\n","SPOT","The center of the drain."]
[null,"DRNT","Trench Drain","Default \"+\"","Width\n","BREAK","The ends of the drain."]
[null,"DRYW","Dry Well for Storm Drainage","DRYW-X","Material\nDepth\nDiameter","DNI","The center of the lid."]
[null,"FDO","For Direction Only","Default \"+\"","Note1 - any notes\nNote2\nNote3\n","DNI","Use to show direction for an object. Typically used to show the direction of a pipe when the other end cannot be located."]
[null,"FLINE","Flow line of Drainage Structure\n","Default \"+\"",null,"DNI","The flow line of the drainage structure."]
[null,"FLTOP","Low Elevation Point of Inlet Lid\n","Default \"+\"",null,"SPOT","The low point of the lid."]
[null,"HWATER","High Water Elevation","BMCHS","Year - year of high water?\nBasis - what is it based on?\n","DNI","The ground at the location of the High Water Mark."]
[null,"I-2-6","Median Inlet No. 2","I-26-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Shoot the flow line elevation at the center of the opening. Openings vary from 6' to 20' lengths.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
["DRAINAGE","I-3B","Median Inlet No. 3","I-3B-SS-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Center of Grate.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"I-4B","Median Inlet No. 4","I-4B-SS-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Shoot the approximate center of the structure on top of the barrier. Measure the barrier height andadd that value to the rod height to set the elevation for the grate.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"MI","Median Inlet","I-D-SS-X","P1\nP2\nP3\nP4\nP5\nN5\n","SPOT","Attributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"OHWM","Ordinary High Water Mark\n","BMCHS",null,"DNI","The edge of the water."]
[null,"PCO","Precast Concrete Pipe Outlet","DM11-X","P1","DNI","The outlet of the pipe.\nAttributes P1 is used to define the pipe in the following format:   dip-size-material-direction\nThe dip value should be zero when the shot is on the invert. Use the diameter of the pipe if the shot is on the top of the pipe.\n"]
[null,"PIO","Pipe Inlet/Outlet","Default \"+\"","P1","DNI","The invert of the pipe.\nAttributes P1 is used to define the pipe in the following format:   dip-size-material-direction\nThe dip value should be zero when the shot is on the invert. Use the diameter of the pipe if the shot is on the top of the pipe.\n"]
[null,"R","Edge of Rip Rap","Default \"+\"","\n","BREAK","The corners of the riprap."]
[null,"RCP","Reinforced Concrete Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The invert of the pipe."]
[null,"RCPA","Reinforced Concrete Pipe Arch","Default \"+\"","Size\nLocation\nCondition\n","DNI","The invert of the pipe."]
[null,"RIVER","Edge of Water","Default \"+\"","\n","BREAK","The edge of the water."]
["DRAINAGE","SMP","Smooth Metal Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"SPP","Smooth Plastic Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"STMH","Storm Manhole","MH1D-X","P1\nP2\nP3\nP4\nP5\nN5\n","DNI","The center of the lid on top.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"SWAMP","Edge of Swamp","Default \"+\"","\n","BREAK","The corners of the swamp."]
[null,"VCP","Vitrified Clay Pipe","Default \"+\"","Size\nLocation\nCondition\n","DNI","The ends of the pipe at the invert."]
[null,"WALLH","Drainage Headwall","Default \"+\"","Material\nLocation\nCondition\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
["DTM FEATURES","B","Ground Break Line","Default \"+\"","\n","BREAK","The break line on the ground."]
[null,"CP","Pavement Crown","Default \"+\"","\n","BREAK","The center of the pavement at the crown."]
[null,"ES","Edge of Slip","Default \"+\"","\n","BREAK","The edge of the slip."]
[null,"OG","Original Ground","Default \"+\"","\n","BREAK","The edge of grading."]
["DTM FEATURES","TB","Top of Bank","Default \"+\"","\n","BREAK","The top of the bank."]
[null,"TSL","Toe of Slope","Default \"+\"","\n","BREAK","The toe of the slope."]
[null,"VOID","Miscellaneous Void Areas\n","Default \"+\"","Note - any notes","VOID","The perimeter of whatever you want to be a void area in the DTM.  Note: VOID areas must be closed."]
[null,"X","Random Ground Spot w/ DTM","X",null,"SPOT","The ground at the locations desired."]
[null,"X2D","Random Ground Spot w/o DTM","X",null,"DNI","The ground at the locations desired."]
["GEOMETRY","CCON","Centerline of Construction\n","Default \"+\"",null,"DNI","The monuments that control this line."]
[null,"CS","Curve to Spiral","PC",null,"DNI","The monument that control this point."]
[null,"CSURV","Centerline of Survey","Default \"+\"","\n","DNI","The monuments that control this line."]
[null,"PC","Point of Curve","PC",null,"DNI","The monument that control this point."]
[null,"PI","Point of Intersection","PI",null,"DNI","The monument that control this point."]
["GEOMETRY","POC","Point on Curve","PC",null,"DNI","The monument that controls this point."]
[null,"POT","Point on Tangent","PC",null,"DNI","The monument that controls this point."]
[null,"PT","Point Tangent","PC",null,"DNI","The monument that control this point."]
[null,"SC","Spiral to Curve","PC",null,"DNI","The monument that controls this point."]
[null,"ST","Spiral to Tangent","PC",null,"DNI","The monument that controls this point."]
[null,"TS","Tangent to Spiral","PC",null,"DNI","The monument that controls this point."]
["GEOTECHNICAL","COAL","Coal Seam Line (Generic)\n","Default \"+\"",null,"DNI","The perimeter of the area."]
[null,"DMAS","Deep Mine Air or Pump Shaft","MINEAPSH",null,"DNI","The perimeter of the shaft."]
[null,"DME","Deep Mine Entry, Slope","MINESL",null,"DNI","The entry.  Dual code with FDO to show direction."]
[null,"DMED","Deep Mine Entry, Drift","MINEDR",null,"DNI","The entry.  Dual code with FDO to show direction."]
["GEOTECHNICAL","DMEDD","Deep Mine Entry Shaft, Drift with Discharge","MINEDRDL",null,"DNI","The entry.  Dual code with FDO to show direction."]
[null,"DMES","Deep Mine Entry Shaft","MINEENTSH",null,"DNI","The shaft."]
[null,"DMESD","Deep Mine Entry Shaft, Slope with Discharge","MINESLDL",null,"DNI","The shaft.  Dual code with FDO to show direction."]
[null,"DMS","Mine Subsidence, Point","MINESUB",null,"DNI","The center point, if possible."]
[null,"PILEBEAM","Steel Beam Pile for Soil Retention, Existing","BEAM_PILE","Length - Length of pile above ground\nLagging - Wood, steel, etc.\nOrient - angle relative to roadway\nBatter - batter angle\nSize - beam size\nNote - any notes","DNI","The top center of the pile."]
[null,"PILEPIPE","Steel Pipe Pile for Soil Retention, Existing","PIPE_PILE","Length - Length of pile above ground\nLagging - Wood, steel, etc.\nOrient - angle relative to roadway\nBatter - batter angle\nDiameter - pipe size\nNote - any notes","DNI","The top center of the pile."]
[null,"RLINE","Rock Outcrop Line","Default \"+\"","\n","SPOT","Edge of the rock."]
[null,"SMH","Surface Mine Highwall\n","Default \"+\"",null,"BREAK","The edge of the highwall."]
[null,"SOIL","Soil Boring Project","SOILB_PROJ",null,"DNI","The center of the boring."]
[null,"SOILINST","Soil Boring Instrumented","SOILB_INST",null,"DNI","The center of the boring."]
["GEOTECHNICAL","SOILTARG","Soil Boring Target","SOILB_TARGET",null,"DNI","The center of the target."]
[null,"SPRD","Spring, Developed","SPRINGDL",null,"DNI","The point where the water leaves the ground.  Shoot an FDO shot to show direction or use RIVER to show the flow."]
[null,"SPRU","Spring, Undeveloped","SPRINGUL",null,"DNI","The point where the water leaves the ground.  Shoot an FDO shot to show direction or use RIVER to show the flow."]
[null,"WDG","Water Well Dug","WWD","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
[null,"WDL","Water Well Drilled w/o Well Log","WW","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
[null,"WDWL","Water Well Drilled w/Well Log","WWL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
[null,"WELLM","Monitoring Well","MWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["LIGHTING","CCPC","Control Center Power Center Base","CCPS",null,"DNI","The center of the base."]
[null,"LPB","Lighting Pull Box","PBJB",null,"DNI","The center of the pull box."]
[null,"LPOLE","Light Pole","LPOLE","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the base at the ground."]
["LIGHTING","TOWLGT","High Mast Tower Light","HMS","Luminaries - number of luminaries\nPole# - number on pole\n","DNI","The center of the base."]
["PAVEMENT","C","Edge of Curb","Default \"+\"","Width\nMaterial - concrete, asphalt, etc.\n","BREAK","The back edge of the curb."]
[null,"DR","Edge of Drive","Default \"+\"","Material - concrete, asphalt, etc.\nType - field, residential, etc.\n","BREAK","The edge of the drive."]
[null,"EB","Edge of Berm","Default \"+\"","Material\nDepth\n","BREAK","The edge of the shoulder."]
[null,"EP","Edge of Pavement","Default \"+\"","Material\nDepth\n","BREAK","The edges of the pavement."]
[null,"GUT","Edge of Gutter","Default \"+\"","\n","BREAK","The edge of the gutter. (bottom of curb)"]
[null,"PLOT","Parking Lot","Default \"+\"","Note - any notes\n","BREAK","The edge of the parking lot."]
[null,"STEPS","Steps w/ DTM","Default \"+\"","Material - steps are made from?\nNumber - number of steps?\nTread - tread width?\n","BREAK","The perimeter of the steps on the ground, or each step as required."]
[null,"STEPS2D","Steps w/o DTM","Default \"+\"","Material - steps are made from?\nNumber - number of steps?\nTread - tread width?\n","DNI","The perimeter of the steps on the ground, or each step as required.  Use this code for steps that are not on the ground, such as a fire escape.\n"]
[null,"WALK","Edge of Walk w/ DTM\n","Default \"+\"","Material\n","BREAK","The edges of the walk."]
["PAVEMENT","WALK2D","Edge of Walk w/o DTM\n","Default \"+\"","Material\n","DNI","The edges of the walk."]
["PAVEMENT MARKINGS","PAINTL","Painted Line on Pavement","Default \"+\"","Color - white, yellow, other\nType - solid, dashed, other\nNote - any notes\n","DNI","The deflections, begin, end, etc. of the line."]
[null,"PAINTS","Painted Stop Bar","Default \"+\"","\n","DNI","The perimeter of the stop bar."]
[null,"PMHS","Handicap Symbol","PMHS",null,"DNI","The top center of the symbol."]
[null,"PMLT","Left Turn Arrow","PMLFT",null,"DNI","The top of the arrow."]
[null,"PMONLY","Word on Pavement “ONLY”","PMON6",null,"DNI","The top center of the word."]
[null,"PMRR","Railroad Crossing","PMRR8",null,"DNI","The center of “X” symbol."]
[null,"PMRT","Right Turn Arrow","PMRT",null,"DNI","The top of the arrow."]
[null,"PMSCHOOL","Word on Pavement “SCHOOL”","PMSC6",null,"DNI","The top center of the word."]
[null,"PMSTOP","Word on Pavement “STOP”","PMST6",null,"DNI","The top center of the word."]
["PAVEMENT MARKINGS","PMTH","Thru Arrow","PMTHR",null,"DNI","The top of the arrow."]
["RAILROAD","FROG","Point of Railroad Frog","RRFROG",null,"DNI","The point where rails cross in a switch."]
[null,"RAIL","Top Center of Rails","Default \"+\"","Type\nCondition\nHeight\n","DNI","The top center of both rails."]
[null,"RAILC","Top Center of Tie between Rails","Default \"+\"","Type\nCondition\nHeight\n","DNI","The top center of the ties between the rails."]
[null,"RAILPS","Point of Rail Switch","RRAILPS",null,"DNI","The switch where turnout begins."]
[null,"RRX","Rail Road Crossing Signal","RRS","Type - crossbuck, signal, gate, buckeye, etc.","DNI","The center of the base."]
["RIGHT-OF-WAY","CRW","Centerline of Right of Way\n","Default \"+\"",null,"DNI","The monuments that control this line."]
[null,"RW","Right of Way","Default \"+\"","\n","DNI","The monuments that control this line."]
["ROADWAY","BB","Bumper Blocks (Parking Lot Block)\n","Default \"+\"",null,"DNI","Each end of the block."]
[null,"BROCK","Perimeter of Bedrock","Default \"+\"",null,"BREAK","The perimeter of the exposed bed rock at the ground.\n"]
["ROADWAY","CBAR","Concrete Barrier","Default \"+\"","\n","BREAK","The center of the top of the barrier."]
[null,"FEN","Fence w/ DTM","Default \"+\"","Type - wire, wood, etc.\nHeight\nOwner - ODOT, private\n","SPOT","The base of the fence on the ground."]
[null,"FEN2D","Fence w/o DTM","Default \"+\"","Type - wire, wood, etc.\nHeight\nOwner - ODOT, private\n","DNI","The base of the fence on the ground."]
[null,"FLAG","Flag Pole","FLAGP","Material - Aluminum, Steel, Wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the base."]
[null,"GATE","Fence Gate","Default \"+\"","\n","DNI","Each end of the gate."]
[null,"GRBAR","Guardrail Barrier","Default \"+\"",null,"SPOT","The ground at the post. Guard rail on both sides."]
[null,"GRBAR2D","Guardrail Barrier","Default \"+\"",null,"DNI","The ground at the post. Guard rail on both sides."]
[null,"GRCAB","Guardrail Cable Barrier\n","Default \"+\"",null,"DNI","The ground at the post."]
[null,"GRILL","Stationary Barbeque Grill","BBQ",null,"DNI","The center of the support at the ground."]
[null,"GRLT","Guardrail Left","Default \"+\"",null,"SPOT","The ground at the face of the guard rail. Guard rail post to the left of the rail as you are taking shots.\n"]
["ROADWAY","GRLT2D","Guardrail Left on Bridge","Default \"+\"",null,"DNI","The ground at the face of the guard rail. Guard rail post to the left of the rail as you are taking shots.\n"]
[null,"GRRT","Guardrail Right","Default \"+\"",null,"SPOT","The ground at the face of the guard rail. Guard rail post to the right of the rail as you are taking shots.\n"]
[null,"GRRT2D","Guardrail Right on Bridge","Default \"+\"",null,"DNI","The ground at the face of the guard rail. Guard rail post to the right of the rail as you are taking shots.\n"]
[null,"HSTONE","Headstone (Grave Marker)","RIP","Width\nLength\nHeight\n","DNI","The top center of the head stone."]
[null,"LINE","Connect points around an object w/ DTM\n","Default \"+\"","Note - what is it?","SPOT","The corners of the object."]
[null,"LINE2D","Connect points around an object w/o DTM\n","Default \"+\"","Note - what is it?","DNI","The corners of the object."]
[null,"MB","Mail Box","MB","Post Material\nSize - size of post\n","DNI","The center of the post at the ground."]
[null,"MISC","Miscellaneous Item Found","UOBJ","Note - what is it?\nDepth - depth below surface?\n","DNI","The center of the object."]
[null,"PAD","Pad Existing","Default \"+\"","Note - what is it for?\nMaterial - concrete, asphalt, etc.\n","BREAK","The corners of the pad."]
[null,"PAD2D","Pad Existing","Default \"+\"","Note - what is it for?\nMaterial - concrete, asphalt, etc.\n","DNI","The corners of the pad."]
["ROADWAY","PB","News Paper Box","PB","Post Material\nSize - size of post\n","DNI","The center of the post at the base."]
[null,"PMTR","Parking Meter","PM",null,"DNI","The center of the meter."]
[null,"POST","Any type of Post","POST","Use - fence, guard, etc.\nSize - diameter of post?\nMaterial - concrete, steel, etc.\n","DNI","The center of the post at the ground. (use offset if needed)"]
[null,"ROCK","Large Rock","ROCK","Note - any notes","DNI","The top center of the rock."]
[null,"SD","Satellite Dish","SATD","Size - diameter of dish?\nDiameter - diameter of post?\n","DNI"," The center of the post at the ground."]
[null,"SPKHD","Sprinkler Head","SPKHD",null,"DNI","The top of the head."]
[null,"WALLR","Retaining Wall","Default \"+\"","Material\nLocation\nCondition\n","BREAK","The perimeter of the wall on top.  Shoot the bottom of the wall as a break line."]
[null,"YLITE","Yard Lite - low to the ground","BUDLIT",null,"DNI","The center of the top."]
["SIGNALS","CPED","Traffic signal Controller Base Mt","CBM",null,"DNI","The center of the base."]
[null,"CPM","Traffic Signal Controller Pole Mt","CPM",null,"DNI","The center of the base."]
["SIGNALS","SGPED","Signal Pedestal","SPED",null,"DNI","The center of the base."]
[null,"SGPOLE","Signal Support Pole","SPOLE","Type\nLength - length of cantilever?\n","DNI","The center of the base."]
[null,"TPB","Traffic Pull Box","SIGPB",null,"DNI","The center of the pull box."]
[null,"TRL","Traffic Line","Default \"+\"","\n","DNI"]
[null,"TRMH","Traffic Manhole","TRAFFIC_MH",null,"DNI","The center of the lid, on top."]
[null,"WIRE","Loop Detector","Default \"+\"","\n","DNI","The loop detectors in a linear fashion."]
["SIGNING","BILLBO","Billboard","Default \"+\"","Permit#\nNote - any notes\n","DNI","The perimeter of the billboard."]
[null,"OCSS","Overhead Cantilever Sign Support","Default \"+\"","Length - length of cantilever?\nClearance - Clearance above pavement?\n","DNI","The perimeter of the base."]
[null,"OSSS","Overhead Structure Mounted Sign \n","Default \"+\"",null,"DNI","Both ends of the mounting systems."]
[null,"OTSS","Overhead Truss Sign Support\n","Default \"+\"",null,"DNI","The outside corners of the truss."]
["SIGNING","SIGNPB","Sign Public","SGN1P","Note1 - any notes\nNote2\nNote3\n","DNI","The bottom center edge of the sign. (Only needed once per sign regardless of the number of posts)\nFor SIGNPB, enter the following:\nSign # from Sign Design manual?\nNumber of posts?\n"]
[null,"SIGNPR","Sign Private","Default \"+\"","Note1 - any notes\nNote2\nNote3\n","DNI","The perimeter of the sign.\nFor SIGNPR, enter the following:\nSign # from Sign Design manual?\nNumber of posts?\n"]
[null,"SLIGHT","Sign Luminaire","SGNL",null,"DNI","The center of the light."]
["SURVEY CONTROL","BM","Benchmark Found","BM","Description - Describe the BM\nLocation - Location of the BM\nNote - any notes\n","DNI","The bench mark."]
[null,"CALPT","Calculated Point","X",null,"DNI","This is for laying out calculated points, or to show a calculated point in COGO."]
[null,"CGSF","Cotton Gin Spike Found","GSPK","Depth\nNote - any notes\n","DNI","The center top of the spike."]
[null,"CGSS","Cotton Gin Spike Set","GSPKS","Note - any notes","DNI","The center top of the spike."]
[null,"CNPT","Miscellaneous Control Point","PC","Note - any notes","DNI","Center of the control point."]
[null,"CONDAT","Control Points Data","Default \"+\"","Note1 - any notes\nNote2\nNote3\nNote4\n","DNI","Use for information to plot in the DGN file about all Control Points/Property Pins, etc."]
[null,"CUT","Cross Cut Found","BMCHS",null,"DNI","Center of cross."]
["SURVEY CONTROL","CUTS","Cross Cut Set","BMCHSS",null,"DNI","Center of cross."]
[null,"DRILLH","Drill Hole Found","DHOLE",null,"DNI","The center of the hole."]
[null,"DRILLHS","Drill Hole Set","DHOLES",null,"DNI","The center of the hole."]
[null,"GOVCON","Government Control Point Found","GOVD","Depth - depth below surface\nDescription - Describe the monument\nNote - any notes\n","DNI","The center of the point."]
[null,"GOVCONS","Government Control Point Set","GOVDS","Description - Describe the monument\nNote - any notes\n","DNI","The center of the point."]
[null,"HUB","Tacked Hub Found","HUBT",null,"DNI","The top of the tack."]
[null,"HUBSET","Tacked Hub Set","HUBTS",null,"DNI","The top of the tack."]
[null,"MAG","Mag Nail Found","MNAIL","Depth\nNote - any notes\n","DNI","The top of the nail."]
[null,"MAGS","Mag Nail Set","MNAILS","Note - any notes","DNI","The top of the nail."]
[null,"NAIL","Carpenter’s Nail Found","NAIL","Depth\nNote - any notes\n","DNI","The center of the top of the nail."]
["SURVEY CONTROL","PK","PK Nail Found","PKNAIL","Depth\nNote - any notes\n","DNI","The top of the nail."]
[null,"PKS","PK Nail Set","PKNALS","Note - any notes\n","DNI","The top of the nail."]
[null,"RSPK","Rail Road Spike Found","RRSPK","Depth\nNote - any notes\n","DNI","The top of the spike."]
[null,"RSPKS","Rail Road Spike Set","RRSPKS","Note - any notes\n","DNI","The top of the spike."]
[null,"SMSF","Survey Marker Spike Found","RRFROG","Depth - depth of marker\nNote - any notes","DNI","The center of the marker."]
[null,"SMSS","Survey Marker Spike Set","RRFROG","Note - any notes","DNI","The center of the marker."]
["SURVEY MONUMENTS","AXLE","Axle Found","AXLE","Depth - depth below surface\nNote - any notes\n","DNI"]
[null,"CMON","Concrete Monument Found","MON","Depth - depth below surface\nNote - any notes\n","DNI","A concrete monument found."]
[null,"CMONS","Concrete Monument Set","MONP","Depth - depth below surface\nNote - any notes\n","DNI","Concrete monument set by ODOT or consultant Forces."]
[null,"CSF","Corner Stone Found","STONE","Depth - depth below surface\nNote - any notes\n","DNI","Center of high point or the mark on the stone."]
["SURVEY MONUMENTS","IPID","Iron Pin & Cap Found","IPID","Size\nName\nNumber\nDepth\nNote - any notes\n","DNI","The center of the top of the pin."]
[null,"IPIN","Iron Pin Found","IPF","Size\nDepth\nNote - any notes\n","DNI","The center of the top of the pin."]
[null,"IPINS","Iron Pin Set","IPS","Size\nName\nNumber\nNote - any notes\n","DNI","The center of the top of the pin."]
[null,"IPIPE","Iron Pipe Found","IPIPE","Size\nName\nNumber\nDepth\nNote - any notes\n","DNI","The center of the top of the pipe."]
[null,"IPIPES","Iron Pipe Set","IPIPES","Size\nName\nNumber\nNote - any notes\n","DNI","The center of the top of the pipe."]
[null,"MONBOX","Monument Box Found","MONBX","Size\nName\nNumber\nNote - any notes\n","DNI","The top of the iron pin in the monument box."]
[null,"MONBOXS","Monument Box Set","MONBXP","Size\nName\nNumber\nNote - any notes\n","DNI","The top of the iron pin in the monument box."]
[null,"MSPK","Mine Spike Found","MSPK","Depth\nNote - any notes\n","DNI","The center of the top of the spike."]
[null,"MSPKS","Mine Spike Set","MSPKS","Note - any notes\n","DNI","The center of the top of the spike."]
[null,"TBAR","T-Bar Found","TBAR","Name\nNumber\nDepth\nNote - any notes\n","DNI"]
["UTILITIES - CABLE TV","CTVA","Cable TV Amplifier","CTVA",null,"DNI","The base of the post at the ground."]
[null,"CTVL","Cable TV Line","Default \"+\"","Location - overhead / underground?\nType - conventional / fiber optic?\nNote - any notes\n","DNI","The location of the line."]
["UTILITIES - ELECTRIC","EME","Electric Meter","EM","Utility - name of utility company\nNote - any notes\n","DNI","The top of the meter."]
[null,"EMH","Electric Manhole","EMH","Note1 - any notes\nNote2\n","DNI","The center of the lid on top."]
[null,"EPB","Electric Pull Box","EBOX",null,"DNI","The center of the Pull Box."]
[null,"ETRANS","Pad Mounted Transformer","ETRANS",null,"DNI","The top center of the cabinet."]
[null,"PL","Power Line","Default \"+\"","Location - overhead / underground?\nVoltage - voltage on the line\nNote - any notes\n","DNI","The location of the line."]
[null,"PLM","Power Line Marker","PMRK","Utility - name of utility company\nNote - any notes\n","DNI","The top of the marker."]
[null,"PLP","Power and Light Pole","PLP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the pole at ground level."]
[null,"PP","Power Pole","PP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The center of the pole at ground level."]
["UTILITIES - ELECTRIC","UBOX","Electric Riser/Pedestal /Box","EBOX","Utility - name of utility company\nSize\n","DNI","The top of the box in the center."]
["UTILITIES - GAS","GL","Gas Line","Default \"+\"","Size\nMaterial\nPressure\nNote - any notes\n","DNI","The location of the line."]
[null,"GLM","Gas Line Marker","GMRK","Utility - name of utility company\nSize\n","DNI","The top of the marker."]
[null,"GLV","Gas Line Vent","GVENT",null,"DNI","The top of the vent."]
[null,"GME","Gas Meter","GM","Size - diameter of pipe\nNote - any notes\n","DNI","The top of the meter cover."]
[null,"GMH","Gas Manhole","GMH","Material - material of manhole\nNote - any notes\n","DNI","The center of the lid on top."]
[null,"GSV","Gas Service Valve\n(Curb Shutoff)\n","GSS","Note - any notes","DNI","The center of the valve."]
[null,"GVALVE","Gas Valve","GV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The top of the riser."]
[null,"WELLG","Gas Well","GWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["UTILITIES - MISC","CISTERN","Cistern","Default \"+\"","\n","DNI","The top perimeter."]
["UTILITIES - MISC","DM","Guy Wire Anchor (Deadman)","DM",null,"DNI","The ground where the anchor enters."]
[null,"FO","Fiber Optic Line","Default \"+\"","Note1 - any notes\nNote2\n","DNI","The location of the line."]
[null,"LE","Leach Bed","Default \"+\"","Depth - how deep is the tile\nSize - what size is the tile\n","SPOT","The perimeter of the leach bed area."]
[null,"PPUMP","Petroleum Pump","GPUMP","Material Type - type of material pumped","DNI","The top of the pump."]
[null,"TANK","Tank","Default \"+\"","Material Type - Material in tank\nTank Type - Material of tank\nLocation - above/below ground\n","DNI","The perimeter of the tank."]
[null,"TFC","Tank Filler Cap","TNKCAP","Material Type - Material in tank","DNI","The top of the filler cap."]
[null,"TOWER","Any type of tower","TOWER","Use - what is the tower used for?\nMaterial - what material is the tower constructed of?\nSize - diameter/size of the tower?\n","DNI","Center of base. (use offset if needed)"]
[null,"UMH","Unknown Manhole","UMH","Note1 - any notes\nNote2\nNote3\n","DNI","The center of the lid on top."]
[null,"UP","Unknown Pole","UP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
[null,"UPB","Unknown Pull Box","UBOX",null,"DNI","The base of the pole at the ground."]
["UTILITIES - MISC","VALVE","Miscellaneous Utility Valve","UVALVE","Utility - name of utility company\nSize - size of pipe\nNote - any notes\n","DNI","The top of the riser."]
[null,"WELLO","Oil Well","OWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
[null,"WELLU","Unknown Well","UWELL","Casing - type of casing?\nDiameter - diameter of casing?\n","DNI","Top of the casing."]
["UTILITIES - SANITARY","SEPTIC","Septic Tank","SEPTC",null,"DNI","Shoot the top of the lid."]
[null,"SSL","Sanitary Gravity Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nNote - any notes\n","DNI","The location of the line."]
[null,"SSM","Sanitary Line Marker","SSMRK","Utility\nNote\n","DNI","The top of the marker."]
[null,"SSMH","Sanitary Manhole","MH1D-X-SAN","P1\nP2\nP3\nP4\nP5\nN5\n","DNI","The center of the lid on top.\nAttributes P1-P5 are used to define the pipes terminating within the structure in the following format:     dip-size-material-direction\n"]
[null,"SSPL","Sanitary Pressure Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nPressure - pressure in line\nNote - any notes\n","DNI","The location of the line."]
[null,"SSV","Sanitary Line Vent","SVENT",null,"DNI","The top of the vent."]
[null,"SSVALVE","Sanitary Valve","SV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The top of the riser."]
["UTILITIES - TELECOMMUNICATIONS","PHBO","Telephone Booth","TBTH",null,"DNI","The center of the phone booth on the ground."]
[null,"PHONE","Pay Telephone ","PPHONE",null,"DNI","The center of the phone booth on the ground."]
[null,"TBOX","Telephone Riser/Pedestal /Box","TPED","Utility - name of utility company\nSize\n","DNI","The top of the box in the center."]
[null,"TL","Telephone Line","Default \"+\"","Location - overhead / underground?\nType - conventional / fiber optic?\nNote - any notes\n","DNI","The location of the line."]
[null,"TLM","Telephone Line Marker","TMRK","Utility - name of utility company\nNote - any notes\n","DNI","The top of the marker."]
[null,"TLP","Telephone/Light Pole","TLGT","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
[null,"TMH","Telephone Manhole","TMH","Note1 - any notes\nNote2\n","DNI","The center of the lid on top."]
[null,"TP","Telephone Pole","TELP","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
[null,"TPP","Power and Telephone Pole","TPW","Material - aluminum, steel, wood, etc.\nOwner - who owns the pole\nPole# - number on pole\n","DNI","The base of the pole at the ground."]
["UTILITIES - WATER","FH","Fire Hydrant","FH",null,"DNI","The center of the top."]
["UTILITIES - WATER","WL","Water Line","Default \"+\"","Size - diameter of line\nMaterial - construction material of line\nPressure - pressure in line\nNote - any notes\n","DNI","The location of the line."]
[null,"WLM","Water Line Marker","WLM","Utility - name of utility company\nNote - any notes\n","DNI","The center of the marker."]
[null,"WLV","Water Line Vent","WVENT",null,"DNI","The top of the vent."]
[null,"WME","Water Meter","WM","Size - diameter of pipe\nNote - any notes\n","DNI","The top of the meter cover."]
[null,"WMH","Water Manhole","WMH","Material - material of manhole\nNote - any notes\n","DNI","The center of the lid on top."]
[null,"WSV","Water Service Valve","WSS","Note - any notes","DNI","The center of the valve."]
[null,"WVALVE","Water Gate Valve","WGV","Size - diameter of pipe\nOpen - open direction left/right\nNote - any notes\n","DNI","The center of the valve."]
["VEGETATION","BUSH","Bush or Shrub","SHRUB",null,"DNI","The center of the bush/shrub."]
[null,"FB","Flower Bed","Default \"+\"","\n","BREAK","The perimeter of the bed."]
[null,"FBR","Raised Flower Bed or Planter","Default \"+\"","Material - aluminum, steel, wood, etc.\nNote - any notes\n","DNI","The perimeter of the bed / planter."]
["VEGETATION","HEDGER","Hedge Row","Default \"+\"",null,"DNI","The perimeter of the hedge row in a clockwise direction.\n"]
[null,"STUMP","Stump","STUMP","Size - diameter of stump","DNI","The top center of the stump."]
[null,"T","Deciduous Tree","TREE","Size - diameter of stump\nType - kind of tree\n","DNI","The center of the tree."]
[null,"TE","Evergreen Tree","ETREE","Size - diameter of stump\nType - kind of tree\n","DNI","The center of the tree."]
[null,"WOODSL","Woods Left","Default \"+\"",null,"DNI","The arcs of woods plotted on the left side as you’re walking.\n"]
[null,"WOODSR","Woods Right","Default \"+\"",null,"DNI","The arcs of woods plotted on the right side as you’re walking.\n"]

{"sheet":"No_Longer_Used","index":2,"n_rows":32,"n_cols":6,"rows_kept":32,"cut":false,"hidden":false,"merged":[]}
["CODE","DESCRIPTION","CELL","ATTRIBUTES","DTM","SHOOT…."]
["***** OLD CODES NO LONGER USED *****\nNote: These codes are still in the ODOT.SMD for compatibility with older projects but not included in the Trimble .FXL file."]
["AERWP","Aerial Wing Point","VCTRL","TARGET #","DNI","The center of the target.\n"]
["BDDAT","Deck Data","Default \"+\"","MAT?\nTHICK?\nCOND?\n","DNI","Dual code with one shot on the deck"]
["BLDAT","Building Data","Default \"+\"","USE? - Commercial /Residential/ Farm/ etc.\nSTORY? - number\nCONST? - frame, masonry\nADD? - address\n","DNI","The corners of the building."]
["BRGRLT","Guardrail Left on Bridge\n","Default \"+\"",null,"DNI","Use code:  GRLT2D."]
["BRGRRT","Guardrail Right on Bridge\n","Default \"+\"",null,"DNI","Use code:  GRRT2D."]
["CB","Catch Basin Linear","Default \"+\"",null,"VOID","Prefer to use codes CBR or CBS.\nUse CB for median inlets.\n"]
["CDAT","Curb Data","Default \"+\"","WIDTH?\nMAT? - concrete, asphalt, stone\n","DNI","The back edge of the curb."]
["CTP","Cable TV Pole","TELP",null,"DNI","Use code:  TP.\n"]
["DRDAT","Drive Data","Default \"+\"","MAT? - Stone, asphalt, concrete\nTYPE? - field, residential, commercial","DNI","Dual code with one of the shots on the driveway."]
["EPDAT","Pavement Data","Default \"+\"","MAT?\nDEPTH?\n","DNI","Dual code with one of the shots on the edge of pavement."]
["FENDAT","Fence Data","Default \"+\"","TYPE? - wire, wood, etc.\nHEIGHT?\nOWNER? - ODOT, private\n","DNI","Dual code with one of the shots on the fence."]
["LEDAT","Leach Bed Data","Default \"+\"","DEPTH?\nTILE?\n","DNI","Use code:  LE.\n"]
["P","Drainage Pipe","Default \"+\"","Use PDAT for attributes","DNI","The ends of the pipe.\nUse DP for Drive Pipes.\nUse CULV for Culverts.\nCodes for Storm Sewers:  CMP, CMPA, CPP, RCP, or RCPA.\n"]
["PADAT","Pad Data","Default \"+\"","WHAT? - what is it for?\nMAT? - what is made from?\n","DNI","Dual code with PAD or PAD2D with one of the shots on the pad.\n"]
["PDAT","Pipe Data","Default \"+\"","SIZE - size of pipe\nMAT - CMP, RCP, clay, etc.\nSHAPE - round, arch, elliptical etc..\nLOCATION - top or invert\n","DNI","Dual code with one of the shots on the pipe.\n\nUse with code P only."]
["POLDAT","Pole Data","Default \"+\"","MAT? - Aluminum, Steel, Wood, etc..\nOWNER? - who owns the pole\nNUMBER?","DNI","The center of the base."]
["PORDAT","Porch Data","Default \"+\"","MAT? Material that porch is made of\nCOVE? yes or no","DNI","Dual code with POR on one of the corners of the porch."]
["PSOP","Painted Sign on Pavement","Default \"+\"","WHAT - what does the sign say?\nSIZE - How big is the sign?\n","DNI","The top center of the marking.\n\nUse codes:  PMONLY, PMSCHOOL, PMSTOP, PMLT, PMRT, PMHS, or PMTH.\n"]
["PULLB","Pull Box","SIGPB","SIZE? - length and width\nSHAPE? - what shape is the box?\nUSE? - lighting, traffic\n","DNI","The center of the pull box.\n\nUse the following codes instead:  EPB, LPB, TPB, or UPB.\n"]
["RAILDAT","Rail Data","Default \"+\"","TYPE?\nCOND?\nHEIGHT?\n","DNI","The base of the rail."]
["SIGN","Sign","SGN1P","Use SIGNDAT for attributes","DNI","Use codes:  SIGNPB or SIGNPR.\n"]
["SIGNDAT","Dual code with SIGNPB or SIGNPR","Default \"+\"","NOTE 1\nNOTE 2\nNOTE 3\n","DNI","For SIGNPB, enter the following: \n    Sign # from Sign Design manual\n    Number of posts\n\nFor SIGNPR, enter the following:\n    What does the sign say?\n    Number of posts, kind, and diameter\n    Lighted?\n"]
["SPRING","Spring","Default \"+\"",null,"SPOT","Use codes:  SPRD or SPRU.\n"]
["STEPDAT","Step Data","Default \"+\"","MAT? - material that steps are made from\nNUM? - number of steps\nTREAD? - tread width\n","DNI","Dual code with STEPS on one of the shots."]
["TPIER","Top of Pier","Default \"+\"",null,"DNI","Use code:  PIERT.\n"]
["UDAT","Miscellaneous Utility Data","Default \"+\"","NOTE 1\nNOTE 2\nNOTE 3\n","DNI","Use for all utility lines to add attributes."]
["WALKDAT","Walk Data","Default \"+\"","MAT?","DNI","Dual code with WALK or WALK2D on one of the shots.\n"]
["WALL","WALL","Default \"+\"",null,"BREAK","Use codes:  WALLA, WALLH, or WALLR.\n"]
["WALLDAT","Wall Data","Default \"+\"","MAT?\nLOCATION?\n","DNI","Dual code with one shot using the codes:  WALLA, WALLH, or WALLR."]
["WELL","Well","UWELL","TYPE - type of well\nCASE - type of casing\nDIA - diameter of casing\n","DNI","Use codes:  WDG, WDL, WDLW, WELLG, WELLM, WELLO, or WELLU."]